Vega77
23.09.2017, 09:40
I have a aquamedic sp3000 as my ato.
Its working just fine with no problems, however its a one sensor ato.
In order to get some extra safety i would like to plug the aquamedic into my powerbar 5.1, set the powerbar outlet to on if theres a pab/profilux failure.
And add a level sensor that will turn the socket off if the waterlevel is too high.
This way the aquamedic sp3000 will function just like before, but if theres a failure with the aquamedic levelswitch profilux will turn it off.
If theres a pab or profilux4 failure the aquamedic sp3000 should behave independantly since the socket is still on.
How do i set this up in profilux 4 ?
There should be no maximum on time, always on as long as profilux levelswitch is not activated.
http://www.aquaristik-zentrum.at/shop/media/images/popup/aquaM_niveaumat_SP3000_detail_skizze.jpg
http://www.aquaristik-zentrum.at/shop/media/images/popup/aquaM_niveaumat_SP3000_detail_skizze.jpg
Its working just fine with no problems, however its a one sensor ato.
In order to get some extra safety i would like to plug the aquamedic into my powerbar 5.1, set the powerbar outlet to on if theres a pab/profilux failure.
And add a level sensor that will turn the socket off if the waterlevel is too high.
This way the aquamedic sp3000 will function just like before, but if theres a failure with the aquamedic levelswitch profilux will turn it off.
If theres a pab or profilux4 failure the aquamedic sp3000 should behave independantly since the socket is still on.
How do i set this up in profilux 4 ?
There should be no maximum on time, always on as long as profilux levelswitch is not activated.
http://www.aquaristik-zentrum.at/shop/media/images/popup/aquaM_niveaumat_SP3000_detail_skizze.jpg
http://www.aquaristik-zentrum.at/shop/media/images/popup/aquaM_niveaumat_SP3000_detail_skizze.jpg