Doser 2.1 and slave doser2.

[janvh001]

Hi

Will a stand alone Doser 2.1 be able to connect and run a Slave Doser 2?
My stand alone died and needs replacement.

[Vinny]

Yes, this will work.

Doser 2 and 2.1 SA/Slave versions are compatible with each other.

[redseapen500]

I connected my slave doser to doser 2.1, but every time the pump #1 in main doser, the pump #1 of the slave delivers the dose too like the main doser.

[Vinny]

It'll do that if you have not yet configured the pump numbering on the Slave doser. Go to the SYSTEM settings page and click on the slave doser image, then click CONFIGURATION.

[redseapen500]

I tried to configure the slave but I always had communication error, I did try to configure it with the old version GCC 109 with no success.

[Vinny]

Use the newest version of GCC.

https://www.aquariumcomputer.com/downloads/ghl-control-center-v1-1-0-2/