PDA

View Full Version : GHL Doser 2 Post firmware update red/yellow flashing



Kingsley
27.07.2017, 08:06
Hi,

I had a problem with my GHL Doser 2 last night noting that the pumps were not working. I also noted on the website that there was a number of updates to the GHL Control Centre and the firmware. I updated the Control Centre to 1.98 and I updated the Doser 2 firmware from 1.11 to the current 1.24. I also updated the driver for the USBVCOM to the latest in the Control Centre package.

Post firmware update I can see the correct Doser 2 serial number and the firmware versions, however the GHL logo is flashing red/yellow and the pumps still dont work when I select the manual buttons on the front of the device, nor from the manual selection on the Control Centre.

:(

Any help would be appreciated.

Regards

Kingsley

Vinny
28.07.2017, 13:51
Hello Kingsley,

Please email us for further support:
support@ghl-kl.de (Outside North America)
support@ghlusa.com (Within North America)

Kingsley
28.07.2017, 14:59
Thanks Vinny. Regards Kingsley