PDA

View Full Version : All purpose Timet



Dumaurier7
15.04.2017, 18:19
Hello, at the feeding pause I have the system set to switch an outlet which powers a feeder to dispense food,all works well but I've noticed that my return pump (RD3) does not immediately go to minimum when the FP is triggered, this results in a large quantity of food going down the overflow.Is there a way to delay switching of the outlet (feeder) for s specified time to allow the pump to slow down?

Gunther
15.04.2017, 18:58
Is there a way to delay switching of the outlet (feeder) for s specified time to allow the pump to slow down?

Yes. You can use the programmable logic for that.


Go to the menu "Programmable Logic"
Chose an unused logic
Set it to function "Delayed on"
Set Input 1 to "Filter"
Set the delay time as you need it
Save the logic by clicking "OK"
Go to the sockets menu
Change the feeder outlet from "Filter" to "Logic x"(the one you have set before)



And that´s it.

Dumaurier7
16.04.2017, 13:02
Thanks a lot!