View Full Version : LED Lighting for my Discus planted tank
Aqua-Passion
11.04.2017, 20:30
Hello ,
I look for a led lighting for my tank
It's MP Smaragd 460 Liters ( 130 X 60 X 60 cm )
It is planted , with Discus
Currently there are 4 T5 54 w tubes
I think because it is closed it would require "Mitras Lightbar"?
Mitras Lightbar Daylight ?
model 120 ?
Would it fit in?
If so, how much is needed for my tank
And what more is needed to connect them to the Profilux 4?
Thank you in advance for your answers
Best regards, Stephane
Hello Stephane
I think because it is closed it would require "Mitras Lightbar"?
yes
Mitras Lightbar Daylight ?
yes
model 120 ?
no, 130
Would it fit in?
i dont know
I think that 1 Lightbar Daylight 130 is enough. You can easily update if necessary.
You need to connect to a PL4
1 Mitras-LB-PSU200
1 Mitras LB ActiveSplitter Cable
1 Mitras LB splitter
regards Pit
Aqua-Passion
12.04.2017, 16:39
Hello ,
thanks for your help
ok for Mitras Lightbar Daylight ;-)
For the size I fear that the "130" is too big
Or can we find the overall dimensions for each model ?
The space available at the top of the aquarium (inside) is maximum
1270mmx560mm and 85mm Between the water and the lid of the tank
For the number, could one really be enough?
1 Mitras-LB-PSU200, 1 Mitras LB splitter ok I see
but for the Mitras LB ActiveSplitter Cable, it is the rj45 Cable from profilux 4 to splitter ?
Thanks
Best regards, Stephane
Hello Stephane
1270mmx560mm and 85mm Between the water and the lid of the tank
Then you need a lightbar 120, the rest is same
For the number, could one really be enough?
yes
but for the Mitras LB ActiveSplitter Cable, it is the rj45 Cable from profilux 4 to splitter ?
yes
regard Pit
In order to connect one or more Mitras LB, you will need:
1x Mitras LB-PSU200
1x Mitras LB-Splitter
1x Mitras LB-Cable-RJ45
One end of the RJ45 cable connects to the splitter and the other connects directly to the Mitras-LB RJ45 port at the back of the P4. This will allow for up to 4 Mitras LB to be connected to the splitter.
Aqua-Passion
12.04.2017, 20:36
Hello thanks
Sorry I am a little lost
LB-Cable-RJ45 and LB ActiveSplitter Cable are the same item (PL-1065) or not ?
Yes, same item. We changed the name because this cable no longer applies to only the Active Splitter. It is now also used for connecting to EXB2, ProfiLux Mini/Light/Terra and ProfiLux 4.
Aqua-Passion
12.04.2017, 20:48
ok thank you for your help
Best regards, Stephane
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.