View Full Version : Change Redox to pH sensor
Bstohrer
21.02.2017, 16:23
Received the P4 yesterday and need to set it up for 2 pH probes. However, I can't seem to find where to change the redox probe socket to pH. I have read Lasse's thread where he asks the same. The answer was "change the measurement range". However, neither I or Lasse can find that menu item for the Redox probe on the device menu.
Thanks in Advance, Bob
MatthiasF
22.02.2017, 07:38
Hello Bob,
actually it is not possible to change the meas. range.
We will include this soon.
faltaren
22.02.2017, 08:56
Will it be possible to have 2 tempprobes to?
Skickat från min E6553 via Tapatalk
Yes, 2 temperature probes can be used. The second probe would be connected to a digital temperature expansion card.
faltaren
22.02.2017, 15:14
Ok so not the bnc connectors for redox and pH? They cannot be changed?
Skickat från min E6553 via Tapatalk
Temperature and ph/redox have different methods for reading measurements. :)
A digital temperature expansion card would be the way to go.
Bstohrer
22.02.2017, 17:41
Hello Bob,
actually it is not possible to change the meas. range.
We will include this soon.
Hi Matthias,
Thanks for the fast reply! I'll keep an eye out for a firmware update.
Thanks, Bob
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.