PDA

View Full Version : Doser



EgaReef
19.02.2017, 11:49
Hi,


New problem:

As you can see the calculated ml amount is 0, and the peristaltic ones do not work.

Regards


8945

clumeng
19.02.2017, 18:31
I think you need to click on "Automatically" and then additional windows appear below. From there you choose which days of the week to dose etc and the mL amount should be updated.

EgaReef
19.02.2017, 21:56
No, the profilux should be calculated, the P3 did it.

Enviado desde mi Nexus 5 mediante Tapatalk

Vinny
20.02.2017, 15:23
You need to select the days for when this schedule should run. Either select the days of the week to run this schedule OR select the in-day intervals.
8950

If this is a Doser 2, nothing else needs to be done.

If you are using a single head doser and it is connected to one of the powerbar outlets, you must assign this dosing schedule to that specific powerbar outlet.

To do that, do the following:
1. Go to the Switch channels and outlets settings page.
2. Select the powerbar socket number where you have this doser connected and set the function to Dosing pump. The number besides the Dosing pump option corresponds to the dosing pump channel you used to create the dosing schedule. For example, if you used Dosing pump 2, you would set the powerbar outlet function to Dosing pump 2.
3. Save settings.

EgaReef
20.02.2017, 17:52
You need to select the days for when this schedule should run. Either select the days of the week to run this schedule OR select the in-day intervals.
8950

If this is a Doser 2, nothing else needs to be done.

If you are using a single head doser and it is connected to one of the powerbar outlets, you must assign this dosing schedule to that specific powerbar outlet.

To do that, do the following:
1. Go to the Switch channels and outlets settings page.
2. Select the powerbar socket number where you have this doser connected and set the function to Dosing pump. The number besides the Dosing pump option corresponds to the dosing pump channel you used to create the dosing schedule. For example, if you used Dosing pump 2, you would set the powerbar outlet function to Dosing pump 2.
3. Save settings.

Hi,

Now everything perfect, the problem was that I did not see the configuration of the days (It is at the bottom).

Thanks for all.