PDA

View Full Version : VorThec MP40 and VorTechController connections problems



JOA1969
27.10.2015, 15:40
Cant find a manual, all links are Not Found. Have no ideas how to do this right.
I need to know with button to press, the pumps are new quiet drive.
Firmware VorTechController 1.03

Vinny
27.10.2015, 16:12
Hi,

Have you assigned the Vortech Controller to your PAB device list?

If not, please do the following:

1. Go to "System"
2. Click on "Assign Devices"
3. Select the Vortech controller and click "OK"
4. You will then be asked if you would like to assign the PAB-device. Click "Yes"
5. Reconnect to the Profilux and you will see Vortech controller listed on the left side.

JOA1969
27.10.2015, 16:17
Yes, thats in order. But i dont know how to connect my two pumps. Assain them to the controller

Matthias
28.10.2015, 17:12
here are the manuals

7870

7871

yes, you are right, the current download section is not complete, sorry for this

will be changed with the release of our new website