PDA

View Full Version : Auto Top up



Pomacanthus
06.11.2009, 20:51
Hi

This is my first post on here, got my ghl last weekend and trying to set things up.

I have an optical sensor, the mounting kit and the pump in s1.

I can get the pump to work if on all time, but I cant get the pump to pump if the water level goes low

I have sensor 1 - Auto top up
10s
ATO in general is always active
Max on time 30 seconds

Thats all I can select

Can anyone help???

GHL Support
06.11.2009, 21:18
Have you set the socket you pluged the pump in to funktion water 1? If not do it and it will work. Keep in mind an trigered alarm will stop the ATO funktion till you manual reset the alarm.

Pomacanthus
06.11.2009, 22:56
Hi

I have the pump set as water 1.

On the display, when the sensor is out of water it has a - next to pump one and when in water it has a x. Not sure if this will help?

How do I manually reset the alarm????

Matthias
07.11.2009, 10:35
reset level alarm: there is a menu in the device itself and in ProfiLuxControl is a button for this purpose

Pomacanthus
08.11.2009, 19:08
That did it thanks for your help

:D

reef
09.12.2009, 08:15
i Have issue when setting up the auto top off sensor.

i have one sensor and setting is as below.

sensor 1 :auto top off
sensor 2 : not enabled,


why does is show in
current sensor states that there are two sensors??

Matthias
09.12.2009, 08:33
This is Ok, all states of the level sensor inputs are displayed even if they are not used.
Does this cause a problem for you or why are you asking?

reef
09.12.2009, 18:48
Does this cause a problem for you or why are you asking?

No problem, just dot like it showing if a second probe is not in use.
Can this be fixed in the next software update?