doser 2 not showing status leds after update.

[StarF]

I just updated my doser 2 unit. I transfered all settings to a file, did the update. When the unit came up again, it was just blinking white in the leds, so i transfered my setting file. I had to reasign how much liquid there were left in the containers as it disent seem that were backed up.

The unit is now only blinking white, my dosing schedule is running how ever. What could be wrong? did i forget something?

Disent there use to be a pdf you could download that explaied what the diffrent colors were?

[Jerel1]

Detailed in version 1.0.1 Manual, though. I am pretty sure the information has been updated since then.

LED Meaning

white GHL Doser 2 is in configuration mode
blue GHL Doser 2 is ready
yellow Container is getting low
red Container is below minimum
green (flashing) Dosing runs
green-yellow (flashing) Dosing runs and one of the containers is getting low
green-red (flashing) Dosing runs and one of the containers is below minimum

[Artur]

The white LED means that the doser is in config mode. If it stays white then there is a problem with the configuration.
Try to restart the doser (unplug power cable for at least 10 seconds) and try to set the default settings.

[StarF]

resetting it to default settings, and manualy config the doser again did the trick. tnx.