PDA

View Full Version : light composer problems


GazzMan
22.06.2015, 19:13
I updated the control centre today which led me to update the profilux, both to the latest firmware.

the problems im having are in light composer, if I load a blank template, I cant do anything with it, I cant input a light run or anything at all.

the output directly to lamp button does not work.

when I modified the light run im using, I transmit to lamp, the test illumination run does not work at all.

as in my other thread, the screens on 2 of my lamps do not work.

7603

notice the "new" button is not active in the above picture.
Artur
23.06.2015, 08:56
Hello,

if you create a blank template you need to add a lightsource in the first place.
Once you added a light source, you can add an illumination run.
GazzMan
23.06.2015, 09:17
Hello,

if you create a blank template you need to add a lightsource in the first place.
Once you added a light source, you can add an illumination run.


Ok thank you, thank you for your PM as well.

Any advise on the other issues as in the top post Artur.
Artur
23.06.2015, 12:49
Try to load a default template for the lamp and change it for your needs.
If the 2 lamps with the screens do not work you can try to reset the settings to default and try to update a firmware update.
If the lamps working but the display not it seems the display is faulty and you should contact your retailer.



the output directly to lamp button does not work.
Which button do you mean?
GazzMan
23.06.2015, 12:59
Which button do you mean?

Sorry, I ment the tick box entitled "output directly to lamp" , if I tick this, nothing happens
Artur
23.06.2015, 13:03
Did you set the brightness and one of the colors?

7605
GazzMan
23.06.2015, 15:06
Did you set the brightness and one of the colors?

7605

Yes

7606
Artur
23.06.2015, 15:12
You controll the Mitras with the ProfiLux?
Did you checked the Channels and set all Mitras to Slave?
GazzMan
23.06.2015, 15:50
You controll the Mitras with the ProfiLux?
Did you checked the Channels and set all Mitras to Slave?

iv found the problem, I changed the Mz from 11 to 26 to as advised before when I had the problem of them staying on, iv put things back to 11Mz and all works well.

obviously they don't work on that setting.