PDA

View Full Version : Wieviel lightbars aquarium 200x80x80



Rob2211
26.04.2015, 11:05
Ich will ein Süßwasser-Aquarium 200x80x80 (Wasserstand 70) mit Leichtigkeit Ghl Mitras Light 100cm Ich fahre mit dem Profilux 3.1. Ich denke, von 8 bar. Das ist mehr als genug, oder sollte ich etwa 10 bar vor? Und nehmen Sie den ganzen Daylight oder sogar einen Teil Ozeanblau?

PIWAWT
28.04.2015, 08:04
Ich hoffe, ich habe alles richtig verstanden.
8 Lightbars sind mehr als genug. Ich würde eine Mischung aus Daylight und Oceanblue nehmen.
Zum betreiben von mehr als 4 Lightbars brauchst du noch spezielles Zubehör, da die eine RS232 Schnittstelle max 4 Lightbars steuern kann.

bad boy
28.04.2015, 18:17
Wir haben in unserem 200x60x70cm Becken 4 Lightbars mit 1m verbaut.
Fahre aktuell mit 90% Helligkeit.
Für unser Becken ist das mehr wie ausreichend.
Ich würde es bei deinem Becken erst mal mit 6 LB ausprobieren.
Die Netzteile aber gleich für 8 St. auslegen.
Nachkaufen kannst du immer noch.

Rob2211
02.05.2015, 11:49
Ich hoffe, ich habe alles richtig verstanden.
8 Lightbars sind mehr als genug. Ich würde eine Mischung aus Daylight und Oceanblue nehmen.
Zum betreiben von mehr als 4 Lightbars brauchst du noch spezielles Zubehör, da die eine RS232 Schnittstelle max 4 Lightbars steuern kann.

I have connected an Eheim interface to the RS232. That's why I need to buy at least one additional RS232 card. What is technically preferable: two additional RS232 cards or one Active Splitter and one RS232 card?

PIWAWT
02.05.2015, 12:36
you need a RS232 Card and a active Splitter. The Eheim Interface is a problem. The lightbars works correctly, but the Eheim make problems. Look this tread (http://forum.aquariumcomputer.com/showthread.php?9235-Mitras-Lightbar-und-Oheim-Controller-zusammen-benutzen&highlight=lightbar+eheim)

Rob2211
02.05.2015, 15:48
Hallo PIWAWT,
Thanks for your advice. Which combination of daylight and Oceanblue do you prefer and what are the positions of the different types of lightbars in the aquarium hood?

PIWAWT
02.05.2015, 17:37
Ocean blue _________¦__________plants,deep
Daylight _________¦__________plant, middle and high
Daylight _________¦__________plants, middle and high
Ocean blue _________¦__________plants, deep

Rob2211
18.08.2015, 10:11
In a few days I will start with the installation of my tank with the Lightbars as proposed by PIAWT.
I'm looking now for à light composer project for the first weeks and one for the stable situation. Of course I Will adapt .them in the future but a starting point would be nice

PIWAWT
18.08.2015, 19:12
Here's a save Projectfile
Start your Lightbars with 50% and increasing gradually the performance over a month to 75%

7708 7709

Rob2211
25.08.2015, 12:05
Thanks for the projectfile. Unfortunately the delivery of my new tank had been postponed. So I can not use/test the file at the moment.