- Conductivity data not being recorded with measurement units
- Temperature calibration
- plm conds-redox card problem
- Can you use a 110v apparatus with a 220v Powerbar5.1 PAB ?
- Web interface Feed Pause and Maintenance labels
- Leak detector question
- PH probe seems high
- GHL Graphs.... What's Happened To Mine?
- ATO using optical/float sensors
- Float level sensor
- Calibrating a conductivity probe
- Ok so I picked up a brand new conductivity probe and calibration solution.
- Conductivity calibration problems
- Conductivity setup
- Cleaning probes and calibration
- Redox probe flatlined
- Cyclic Timer
- Flowsensors
- flow sensor problem
- Flow sensor is not detected.
- Flow sensors
- Length of cables ??
- measurement cell
- Please help me out with these levelsensors.
- Missing Plug Bars
- flow sensor and float on the same input
- Ato
- Contactless level sensor
- My expansion card wont work :/
- How to change from pH to redox when the extension card is situated in an expansionbox
- dosing pump help needed
- The reading of redox sensor is so unstable
- AWC with sump
- Level alarm
- QA of my ATO & Doser Setup
- powerbar problems
- How get the ATO work with 2 sensors ?
- Settings to control both heaters and cooling fans via GHL powerbar
- Expansion box PAB
- PH trubble
- Oxygen module card and Oxygen probe in P3
- pH 7, pH 9 calibrate solution can keep after first used?
- Ex card profilux 2 plus instalation
- Measuring ATO usage
- New Vortech Quite Drive
- Measuring Power Usage on a Single Socket?
- help me with Return Pump Control please
- 50mS/cm calibration solution
- timer for pump when ato
- Profilux II plus broke?
- Vortices Box 2x Mp60 QD not connecting
- Measuring ATO usage & monitor Vortech's
- Do I only need the Doser 2 now?
- Level sensor problems
- Please help with ATO and AWC with sump
- Squeaking Doser 2 Pumps
- Flow Sensor Connection Question
- Monitor KH?
- Flow sensor connection
- which one should i plug in /Optical or float sensor
- ATO Stopped Working
- Profilux 3 Ex Level 3 sensor input doesn't work...?
- where to connect the STDL L4-4
- Maintainence
- Level sensor does not works
- Power bar 6d pab, who to assign it to a eg S10
- How do i control a Drew's Doser on Profilux 3 eXn
- UPDATE: myGHL gets an upgrade!
- Assigning another powerbar 6D ?
- Ph Control using Dosing pumps
- two temp probes with two different temp readings......
- Redox 4l port and dimmable balast problem
- Slave Doser 2 updating FW and connecting to P3
- VINNY :) How do i control the Level sensors
- LAN Connection
- pH Nächtliche Änderung
- How do i get this to work?
- Alarm
- Why is this happening?
- two programme logic for one socket
- Can a Level sensor operate my Doser pump?
- Oxygen probe
- Possible Float Sensor fault?
- Float level sensor malfunction?
- Optic sensor
- PAB bar
- Upgraded FW (6.2), Having Issues Calibrating pH Probes
- Calibration - Sensors gone wild - PLEASE HELP
- Sensors measurement range
- timing set points
- Flow sensor turning off return pump
- Redox Calibration
- Alert on delta between two Ph Probe
- Measurement of total water- and power consumption
- Multiple pH probes
- chip and pinout of air/humidity sensor
- pH and redox readings
- Redox probe problems
- it's possible inverse AWC ?
- Maximum on-time with AWC & Water change
- AWC with two optical level sensors
- DO probes - at low DO
- Conductivity-Electrode Platinum vs Conductivity-Electrode
- When connecting to profilux "enter a number" message is shown
- Temp-Humidity sensor got wet
- acces profilux though network / rss feed question
- Salinity control
- Optical sensor position
- Conducrivity sensor problem
- Slave Doser, not GHL
- P3 Ex not reading Temp Probe
- Wrong text in the window for management of Oxygen sensors?
- Assigning Expansion box 2
- Connecting 2 profilux 3 computers together
- controlling tunze ATO for salinity
- Probe Storage
- Optical Level Sensor PL-0082 Lifetime
- Leak sensor corroded and failing despite never having got wet
- FLOAT Switch ATO
- 2 additional level sensors
- Latest FW PAB powerbar
- Flow Sensor data mesurement graphics
- Why is my AWC not working
- Redox / ORP Probe
- Ph probe calabration
- REDOX PROBE setting for Nitrate reactor
- Temp probe differences between P3 and Expansion Box
- how to set up ATO?
- Temp probe -1ºC off
- Optical Level Sensor PL-0082 Lifetime
- Profilux 3 EX and 3.1N/T EX Differences
- Conductivity card change to salt water
- Profilux and its extender
- Measuring current of devices used
- Socket won't turn off
- How to connect 3th flow sensor to Profilux 3.1T ex
- Dual Head dose pump failsafe: which combination of socket functions?
- Flow sensor
- Profilux Wireless options and wireless usb options
- Ato - min max
- Ph Probes fluctuating
- Profilux 3 ex to ProfiLux 3.1T eX
- AD
- Use TWO Profilux 3
- water leakage sensor
- 1 Socket, 2 Functions?
- pH and hysteresis
- additional screen, viewII
- PH probe calibration PII v5.17
- USB at back of ProfiLux 3.1T eX
- Floating sensor
- Change a pH/redox card
- Fimrware
- Expansion cards
- calibrating
- 3 Tunze on the new Profilux mini
- pH control using Profilux 2 Plus
- Temperature reading incorrect
- Salinity and ph reading a problem
- Nocturnal change problem?
- Conduct probe change?
- Profilux 4 connects to Profilux 3.1T
- Problem with conductivity psensor connected to the expansion box
- AWC - after water change finished I need to start a pump for 60 seconds
- Help manage several aquariums with profiLUX 4
- Flow Sensor Set Up Problem
- Expansion bos v1 problem
- Level Sensor Issue
- Calcium and Alkalinity sensors
- level sensor and leak sensor y cable
- Profilux 3.1t does not display redox and conductiviti graphics
- Redox calibration
- rh with Dynamic Nominal Value / virtual probe
- Redox freshwater aquarium
- Instructions on how to calibrate probes
- Profilux 4 and old expansion cards
- Calibrating Conductivity probe for freshwater
- Is my pH probe broken? Too strange data
- Conductivity Probe values drifting down
- Level sensor configuration
- Backup Profilux 3 settings and transmit to Profilux 4?
- Flow sensor flow rates?
- Temp probe calibration
- Profilux Setup.
- New PH Probe with bad measures
- Are Profilux II plus expansion cards, probes compatibility with newer models?
- Where to buy plumbing fittings for flow sensor
- how to view all actions done automatically
- Temp sensor calibration / correction for profilux 4
- Flow sensors wich to choose ?
- Propre with the pH senor
- Connecting 6 level sensors
- Problem switching redox to ph on an expansion card
- PAB cables
- Can't see my Cond, Redox and pH2 probes in GCC
- Expansion Box constant yellow after power failure
- 2 sensor ATO
- cant calibrate in GCC
- Firmware update broke sensor settings
- Two optic sensors ATO
- 2 Questions
- Probe Holder
- CondS PL-0003 no longer listed in Sensors following firmware upgrade 6.18 -> 6.29
- two sensor ATO
- KH Director
- Redox Readings
- pH sensor malfunctioning (profilux 3)
- need help with ATO optic sensor
- Cut and reconnect level sensor cable?
- Magnetic Solenoid
- P4 ato and waterchange
- Profilux accuracy of the pH sensors.
- KH Director question
- P4 - problem with multiple level sensors using Y splitter PL-LY
- Conductance probe
- Are all probes fully waterproof?
- Sensor Issues with Profilux 3.1T EX
- Calibration of the temperature sensor
- Connecting two temperature probes to Profilux 2 Plus Ext... how?
- ph probe
- multiple level switch
- level numbering
- Starting manual water change via P Touch
- Level sensor
- PLM-pH/Redox-Cond Sensor Inputs
- Salinity Control Again-Again
- PH Probe Defective
- Refractometer or conductivity probe?
- PH How to?
- Connect Par-meter on Profilux
- Is it possible to use 2 PH Probes at the same time?
- Min max level
- New Temperature probe testing PL3
- Set Doser pump as ATO now getting Pabcom error
- P4 Calibration Problems
- Using Level Sensor to report low water levels
- 0-10v pin
- Humidity and temperature control of external wall fan from one Socket
- How to turn pH sensor controller off at night
- Floater inconsistent
- Profilux 3 - Controlling solution pH with CO2 and air pumps
- Probe connections when moving Profilux around
- Flow sensor connect to expansion box 2 problem
- Powerbar 6D and Powerbar 6D PAB AUS
- Maxi Doser or Power Bar 5.1 and pumps for ATO & AWC
- Wrong description flow sensor
- controling a calcium reactor?
- Flow sensor not acknowledged
- 6d plug bar spares
- Length of Level Sensor Holder Base Unit PL-LF-Base2