View Full Version : Illumination control
- 1-10v help
- Light controll
- 12V Halide lamps
- Standard Light bulbs and....
- tmc aquaray
- Dimm Control
- Can you please give an example of Variable Illumination in ver 4.05?
- Metal halides, too much or not?
- Dimmable ballast for 36" T5HO (39W)
- Lf-abox
- light stick
- Getting dimmable t5s
- EVG-AP-2F help
- How to connect ATI Powermodule
- How many Ports
- DALI or 1-10V Driver Blank
- How to connect a EVG-AP-2F
- Which firmware is necessary for dimming control?
- Simul L and T5 Schedule Configuration
- Setup DALI
- LED Light stick
- Variable Illumination
- Moon Phase - Simul L
- ProfiLux and Aqua Illumination
- Profilux to control buckpuck LED drivers
- Dimming ballasts
- Dimmable LED 0-10v output cable
- do t5 require burn in for the dimmer?
- examples of sunrise/ sunset using simu-L with dimmable t5??
- any way to turn clouds off for lower range of dimming
- Simu-L Control
- Tridonic Electronic Ballasts
- Illumination using timer
- Dimmable LED lighting with contrllable pumps
- LED Stabi or Spot simu?
- I need wiring help please!
- Powermodule help - please!
- Y-splitter for 4 separate channels?
- flash
- Simu L Spot coverage ?
- Dimming Icecap 660 Ballast.....
- Driver blank differences
- ProfiSimu qusetions - Moonphases, etc.
- Simuspot red in moon cycle
- dimming
- Dimming set up question
- high current driver
- How to connect ATI PM Dimbar to EVG-AP-2F-HIC
- Screen Shots of Lighting scenarios??
- How to connect 4 EVSA's on to 1 DALI card
- Aqua Photon
- Thunderstorm Question
- Dali Dimming
- 1-10v dimming and power control for light diy
- Aluprofil 3
- Cloud simulation question
- Meanwell ELN-60-48D LED Driver
- Rainy days - halides
- dimming
- Profilux control of switching ballasts
- Profilux, DIY LED, and effects ...
- Do I really have to strip kabels to connect 4 EVSA's to one PLM DALI?
- simu stick
- power up ghl lightbar without profilux
- mh thermal shutoff
- Thunderstorm light dimming.
- programmable logic help
- Help setting up blue night stick ?? RC support moved
- HELP With Profilux and Dimmable T5's
- Dimming LED's?
- Lighting Schedule Duration Profilux Plus III
- DALI ballast matching
- Can'nt change assign illumination after an mistake
- GHL dimming problem - help!!
- moon fase overlap ?
- DIY LED Lighting Project
- dimming question
- Do I need the EVG-AP-2F-HIC?
- Aqua Illumination "older lamp module"
- Problem with L1/L2?
- ATI Power Module and ProfiLuxMoon-/ Simu-L?
- Thunderstorm not working with P3
- Controlling Aquarays
- Setting to 0v
- MY DIY LEDs with Profilux controller..
- DALI module doesn't recognize Osram ballasts
- Shopping List for my DIY LEDs
- 0-10v dimming channels - true analog or PWM simulating analog output?
- Light Bar for 54W T5?
- AI LED new model not following Profilux program
- illumination question from RC
- Need help on ProfiLux ll light
- moon symbol
- 1-10v port's pin configuration
- Profilux-Light/Aquaray 500/Led Control 1
- Profilux Simu L and Aquaray control
- T5's on Dimmable Power Bar - Flickering T5s at low power
- Dali module and OSRAM quicktronic
- profilux simu-spot too bright
- Help get my Dimmable T5s going!
- Who Makes 48" T5 Fixture that runs with GHL
- Geiseman GHL upgrade
- dimmable ballast for 36w pc lamps
- Sfiligoi stealth T5 dimmable ?
- Help setting up Non-Dimmable T-5's to work with Profilux II Light Bar
- ProfiLux ll light's PC interface
- GHL and BuckPucks.
- 250w halide balast on power bar
- Help project dimmable lights on RSM 250
- Problem with L4
- Ecoxotic LEDs
- Simu -L light stick problem
- PL-0644 ActiveL-Splitter To run X15 ELN-60-48
- Ati Sunpower and Simu stick time suggestions
- problem with light program - not coming on
- Controlling Aqua Illumination not working
- ATI Power Module used for moonlights?
- EVG-AP2F connection
- What does this mean? min.dimlev.dali
- Connection of Dimmable LED's to profilux IIIEx
- Display error - strange characters
- Connecting Aquaray500 to profilux
- Programming a Thunderstorm
- light error?
- Simu-spot and PAB
- PL control 5.0.1.1 vrs SIMU spot programming issue
- Setting up the LED-1 controller
- Why L2 dimms with L1 ?
- help PLM-DALI card
- Lights switch off 2 hours later than programmed
- Maintenance + DALI dimming?
- Change daily lighting with AI LED?
- Aquaray & moonlight simulation
- Thunder Storms with Dali Ballasts?
- Why L1 lights up when L2 is at least in 1%?
- What is the need dimmer lambs?
- lighttubes unwillingly linked
- AI data cable pin out
- Simu L: sunrise color
- A quick question on simu's
- Rainy Days and Cloudy Days . . .
- Poss bug in cloud logic
- ProfiLux II Light
- What is pin out (L1L2 socket) - TXD, RXD, GRD, ets?
- Simu L: moonlight flashing
- Is my GHL & ATI's working correctly?
- DE Lightings T5 Unit control
- Giesemann Infiniti + Profilux II -Help required
- Twin 250W Halide on Plugbar?
- ProfiLux controlled Xmas tree
- AI control of all 3 channels white, blue, Royal Blue?
- Profilux II Light and DALI card ?
- Simu-L Thunderstorms..?
- Lighting Connections
- Connecting Giesemann Matrix plus to Profilux II Light
- Synch. Sound with Thunderstorms from the Simu-L
- [SOLVED] 2 Simu L in 1 active splitter & programming
- Rebuilding / Connection of (dimmable) lamp
- How to make sunrise on plus II ?
- LF-ABOX electricity safer?
- T8 no dimmable to T8 dimmable and Profilux control
- ELDO LED drivers DALI and Profilux?
- T5 dimming with Profilux Plus II Profiset
- what is the proper way to setup for AI sol BLue 3 channel?
- Arcadia Eco-Aqua LED Lamps and LEDControl???
- Connection issues
- How to diimm ATI Powermodule 10x54w lamp with Profilux II Light?
- Setting up metal halide DE 400w with Profilux 3
- Dimming Issues With Aquamedic T5s
- duration
- known LED Fixtures that work with Profilux III
- Aqua Illumination Sol
- Aquaillumination Channel Numbers
- Aqua Illumination Sol Profilx Cable Pin Outs
- DIY LED Build with Meanwell drivers and EVG-AP-2F
- Profilux moon spot for thunderstorm
- PLM-4L added to ProfiLux3-Ex: only one additional L-port
- Lbf-ap
- Aqua Illumination levels during maintenance
- 0% isn't black out
- AI "set points"
- DALI dimming: Light flashes at low intensity?
- help with LEDControl4 Passive (and black python)
- Clouds
- Temperature controlled shut down of non dimmable lights
- Dimmable T5's dimming at a different rate
- ati Sunpower on profilux
- GHL T5 lights
- Great movies about ProfiLux illumination simulation
- AI SOL LED set up
- can someone help me
- Ai wireless module
- Thunderstorm programmable logic HELP!!
- DALI controlled dimmable lightbar over 100% illumination?
- Profilux - Mean Well ELN 60-48P
- Different Illumination Times On Different Days
- GHL LEDControl4Active (PL-0775)
- thunderstorm - whites stick on
- Simu-l & ledcontrol4active together?
- DALI Philips
- Light program recommendation for maximum coral growt
- Spot simulation* light -unusual behaviour
- EVG - Programming?
- Pacific Sun Control
- Ballast 1 is not dimming using the Profilux EVG-AP-2F
- mutlple DALI ballast, wiring, series or parallel?
- strange AI issues..flashing
- AI lead extension
- Pacificsun on Prolilux 3
- AI and profilux II light bar
- Akva Stabil
- DIY LED and LBF-AP
- Dimmablle ballast info needed
- Thunderstorm and illumination Question
- 2x LedControl + Thunderstorm (Flash1/Flash2) question to GHL team
- Dali card not finding ballast
- automatic dali dimming for thunderstorm
- aquaray duo storm
- will LEDControl4 - Passive work for a....
- ProfiLuxSunrise-/ Simu-L not working
- Akvastabil 2x 39W T5 dimmable light bars
- AI control with expansion Box RS232
- mA of L1/L2 pin1 12v output
- Ecoxotic, Radion or AI
- DALI design hints
- adjustment Illumination problems in PCL5
- profilux II light help..(urgent)
- Seasonal Lighting Change for sunrise and sunset
- upgrading Sunpower light
- can the profilux 3 control a dimmable ballast for metal halides?
- How to connect GHL Profilux 2 to pc ?
- Channel 3-4 react only to channel 4
- Modifying an LED dimmable light using the EVG-AP-2F
- AI LED & ATI 10*24 Dimmable
- New light
- Problem with GHL Profilux II
- TL5 lamps don't switch on anymore
- Second Simu-L won't flash in thunderstorm
- What is different between EVG-AP-2F-HIC EVG-AP-2F-2h or EVG-AP-AP2
- Number one ballast wont dim
- Lights temperature
- Problem with thunderstorm and Passive4leds
- Cloud Simulation
- Problems dimming lower than 7%
- AI rs 232 connector to ex3 wires pulled out
- Can I connect two different wattage EVG's forT5 lamps on one EVG-AP-2F?
- Dimming
- Red Sea max stock lights controller help
- ProfiLux II Light for Temp and AI VEGA control.
- Can not turn on Lights..Please help
Powered by vBulletin® Version 4.2.5 Copyright © 2023 vBulletin Solutions, Inc. All rights reserved.