Can someone provide the proper pin mapping for the rs232 -> 6pin view cable? I recognize they are available for purchase, but I also have all the parts to make my own.
Thanks,
Adam
Can someone provide the proper pin mapping for the rs232 -> 6pin view cable? I recognize they are available for purchase, but I also have all the parts to make my own.
Thanks,
Adam
bump
Traced two pairs of the contacts back to the MAX232., found the ground and 12v supply.
It was tricky because I found the second channel first which must be for the display and the first channel is for a computer connection.
pins 1 and 6 shorted together
using this as the guide for the female socket viewing it from the back
DE09pinout.jpg
1 -> T2OUT (Display?)
2 -> T1OUT (Computer)
3 -> R1OUT (Computer)
4 -> R2IN (Display?)
5 -> Ground
6 -> Shorted to 1?
7 -> NC?
8 -> NC?
9 -> 12v
Profilux SUBD.png
regards Pit
Thanks!
Do you happen to have the pin match for the display unit as well?
Bookmarks