Results 1 to 3 of 3

Thread: Vortech Controllers Override through Profilux

  1. #1
    Join Date
    26.05.2010
    Posts
    46

    Default Vortech Controllers Override through Profilux

    Hi All,

    I got 2 MP40W QD and I'm planning in have them controlled through GHL.
    Before I do this I would like to know if after synchronize the Ecotech Controllers with Profilux will I be able to use the Controllers same way or they will be override by GHL?.

    Thanks,

    Pedro

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi Pedro,

    Once the Vortech pumps are linked to the GHL Vortech controllers, the drivers become slaves. This is the same result you'd have if you were to assign 1 vortech as master and another as slave, without the ProfiLux controlling anything.

    If you need to make any changes to your vortech flow settings, you would do so by connecting to the ProfiLux and going to the vortech settings page or Stream Pump settings page.

  3. #3
    Join Date
    26.05.2010
    Posts
    46

    Default

    Hi Vinny

    Thank you for your reply, in this case I might have to stick with original configuration
    Thanks
    Pedro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •