Zeige Ergebnis 1 bis 9 von 9

Thema: Level control support bar set up

  1. #1
    Registriert seit
    19.02.2009
    Beiträge
    792
    Downloads
    16
    Uploads
    0

    Standard Level control support bar set up

    Something we are asked a lot is how do you put together the PL-LF-Base

    Here is a picture which helps



    if you have a rimless tank here is a modification that can be done

    161296IMG_4423.jpg


    GHL ProfiLux Canada/USA Distribution and support

  2. #2
    Registriert seit
    20.02.2009
    Beiträge
    60
    Downloads
    0
    Uploads
    0

    Standard

    is there a way to extend the wire on the float to reach the controller?

  3. #3
    Registriert seit
    21.02.2009
    Beiträge
    23
    Downloads
    0
    Uploads
    0

    Standard

    Zitat Zitat von 90reefernyc Beitrag anzeigen
    is there a way to extend the wire on the float to reach the controller?
    I just got a 2nd hand unit and the person i got it from had cut the wire on the float to make his longer! and its still working fine! just put a pices wire in the middle!

    Tho i would wait for a expert reply!

    Edit: also just thort as its the same as ps2 mouse and keyboard for the pc you could try a ps2 cable ( e.g http://cgi.ebay.co.uk/Cablestar-PS2-...QQcmdZViewItem )

    Hope this is aloud to post links like this! if not please delete and i wont do it again! just helping others when i can!
    Geändert von garybuk (22.02.2009 um 23:35 Uhr)

  4. #4
    Registriert seit
    19.02.2009
    Beiträge
    792
    Downloads
    16
    Uploads
    0

    Standard

    VTN-5 product code and they can be joined together to a max of 4 giving 20 meters!!

    For under $15.00 in North America really not worth the trouble of cutting a cable


    GHL ProfiLux Canada/USA Distribution and support

  5. #5
    Registriert seit
    21.02.2009
    Beiträge
    23
    Downloads
    0
    Uploads
    0

    Standard

    Zitat Zitat von aqua_digital Beitrag anzeigen
    VTN-5 product code and they can be joined together to a max of 4 giving 20 meters!!

    For under $15.00 in North America really not worth the trouble of cutting a cable
    would the 2nd idea work? and am i aloud to post links like that? again sorry if im not

  6. #6
    Registriert seit
    19.02.2009
    Beiträge
    792
    Downloads
    16
    Uploads
    0

    Standard

    No way of knowing if it will work, as GHL do not make this.

    If you are going to extend any cables use GHL cables, you are then covered by GHL support of something is not quite right, it is impossible to diagnose issues that may arise from thrid party stuff

    GHL cables are really cheap there is no reason not to use them really.


    GHL ProfiLux Canada/USA Distribution and support

  7. #7
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Country
    Germany
    Beiträge
    5.246
    Downloads
    10
    Uploads
    66

    Standard

    our splitter cable for level sensors is not the same as the PS/2 splitter for PCs!!!
    If you use this instead serious damages could be the result!

  8. #8
    Registriert seit
    01.03.2009
    Beiträge
    2
    Downloads
    0
    Uploads
    0

    Standard

    i just recieved my level sensor splitter and it has a picture of a keyboard and mouse right on it. came in a profilux bag ordered from cherry corals so i assume its the right piece except for the statement above telling me otherwise. should i still use it?

  9. #9
    Registriert seit
    19.02.2009
    Beiträge
    792
    Downloads
    16
    Uploads
    0

    Standard

    If it has a silver sticker with PL-LY written on it they are the supplied splitter


    GHL ProfiLux Canada/USA Distribution and support

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •