Results 1 to 3 of 3

Thread: My GHL controlled refrigerated dosing system

  1. #1
    Join Date
    04.07.2010
    Posts
    3

    Default My GHL controlled refrigerated dosing system

    Wanted to share with Profilux forum my GHL controlled refrigerated feeding system hooked up to my P3.



    The system has evolved to the current set-up to feed my non-photosynthetic aquarium. There were different versions of my set-up but once I had my P3 set up this was bound to be controlled by it.

    Mike Lukaczyn

  2. #2
    Join Date
    20.02.2009
    Location
    Almacelles
    Posts
    150

    Default

    Nice work, but don't you think it is possible the dosing unit will get some humidity inside the refrigerator?
    GHL Iberia

  3. #3
    Join Date
    07.06.2009
    Posts
    738

    Default

    humidity in a fridge condenses on the coldest part in the frigde => should be the cooling element

    another question I see that you pipe passes through your fridge , I hope you don't send water through constantly since that would lower the cooling effeciency alot
    but pump water though it before and after dosing could be an idea , and if the loop is small enough the amount of dead water in such a small loop and time frames of dosing would be a none issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •