Firmware 5.00o (BETA) for ProfiLux 3

***Matthias*** · 16.03.2010, 17:16

Important:
With 5.00n it is possible that some data in ProfiLux 3 disappear after a powercut (PAB-configuration and measurement values)

!Please update to 5.00o if you are using 5.00n!
(don't forget to assign devices in PAB if devices are present after updating)

further new after wished many times:
It is possible to browse now directly to every web page of the ProfiLux 3 without going over the login page, the login data can be transmitted with the address, e.g.:
http://192.168.0.111/sensors.html?name=Admin&pass=123

**mshur** · 16.03.2010, 17:42

Is it Ok to upgrade via USB? i have stable connection with USB

***Matthias*** · 16.03.2010, 17:50

yes, of course

I update about 10 -20 times per day via USB during development ...

**mshur** · 16.03.2010, 17:51

great! Will do when i get back home after work...

**Blahenazo** · 21.03.2010, 20:08

Originally Posted by Matthias

Important:
With 5.00n it is possible that some data in ProfiLux 3 disappear after a powercut (PAB-configuration and measurement values)

!Please update to 5.00o if you are using 5.00n!
(don't forget to assign devices in PAB if devices are present after updating)

further new after wished many times:
It is possible to browse now directly to every web page of the ProfiLux 3 without going over the login page, the login data can be transmitted with the address, e.g.:
http://192.168.0.111/sensors.html?name=Admin&pass=123

bleh, just came house and relalized this was the case with my profilux (still running fw n )

and I just recalibrated yesterday grrrr

gonna wait on p ,

**aqua_digital** · 22.03.2010, 16:41

what about connection drop outs over ethernet when plugged directly into router but then pc connection is over wireless?

**aqua_digital** · 22.03.2010, 17:27

Download over USB = FLASH ERROR

Good ole Flash FR to the rescue!

**Blahenazo** · 22.03.2010, 20:05

I can't image that some many users have a bad connection/wifi (right before the newest plc) or even via usb. (my last FW update failed over usb ).

Anway I'm confident GHL will find the issue and solve it.
Even with the new plc and fb the communication is still 'shaky' under the covers it reconnects (via wifi) but reconnecting doesn't 'solve' the isssue.

**steviek** · 28.03.2010, 08:47

when firmware updating what is the prefered route ... usb or network or serial?

Does it say successfully completed update, so you know its done?

i have been having trouble of late. Thanks in advance for any help.