profilux 3 ex wont connect to GHL APP firmware 6.46 as well as setting up doser

[MatthiasF]

Hi,

using the wifi extension card in the P3 allows only communication with GHL Control Center; not any other access like GHL Connect is doable with it.
If you don't want to use ethernet, you can hookup a dedicated wifi accesspoint with an ethernet port an attach the P3 to it.
The wifi accesspoint can then be connected to your local wifi router, which allows you to use your smartphone and GHL Connect to access the P3.

[sreal1]

Hi,

using the wifi extension card in the P3 allows only communication with GHL Control Center; not any other access like GHL Connect is doable with it.
If you don't want to use ethernet, you can hookup a dedicated wifi accesspoint with an ethernet port an attach the P3 to it.
The wifi accesspoint can then be connected to your local wifi router, which allows you to use your smartphone and GHL Connect to access the P3.

Oh ok, thank you for explaining.
So how do i go about connecting it to the app (ghl connect) once i have it connected via ethernet? Were do i get the ip address and port for the profilux 3? As it asks in app? Would be great if you could let me know in steps how to go about this. I have just connected it via ethernet.
As at the moment having to connect the usb cord to laptop is frustrating as i also do not have wifi access to the ghl control center set up either.
Thank you

[Vinny]

In the SYSTEM page of the P3 there is a LAN button. Click it to open the settings page for it. There you will find all information related to the P3's network connection.

1. Follow the instructions for setting up your extender.
2. Connect the LAN cable to the P3 and extender.
3. After the extender is setup, it should give the P3 an IP address which will be viewable in the network page. With this information, you can create a new connection in the app for it.

If all goes well, you should see an IP address automatically filled in the Current IP address section of the SYSTEM page.

Take this IP address and open the GHL Connect app.
1. Press Add device, choose the P3
2. In the Host/IP section, type-in the P3's IP address which you saw earlier
3. Give this connection a name and press DONE

As long as the phone is connected to the same Wi-Fi network, you should be able to access your controller through the app.