Results 1 to 2 of 2

Thread: KH Director Set Up

  1. #1
    Join Date
    20.03.2018
    Posts
    15

    Default KH Director Set Up

    Hello, I already received my KH Director but I do not know how to configure it. (I already read the manual and I do not understand. Sorry.) I handle the alkalinity of my aquarium at 8.5 dKH. I use a calcium reactor and I do a fine tune by dosing 7 ml of alkalinity (Tropic Marine Balling Part B ALK) in the morning, another 7 ml in the afternoon and, additionally, every day at night I measure the alkalinity with my Hanna Alk Checker and in order to raise my alkalinity, in case it is low, I must add 12 ml of balling alkalinity (Tropic Marine Balling Part B) to raise 0.5 dKH.
    What work mode should I use with the KH Director: “Add-on Control Mode” or “Adaptive Control Mode” and how should I configure it?
    Thanks.

  2. #2
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    As you know the exact amount you have to dose to raise KH, you should use add-on control mode.
    In your case the volume change for 1 dKH is 24ml and on the limits you enter the maximum amount to change on the alkalinity dosing for raise and lower KH.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •