Seite 6 von 7 ErsteErste ... 4567 LetzteLetzte
Zeige Ergebnis 51 bis 60 von 64

Thema: cant set up KHD

  1. #51
    Registriert seit
    07.07.2013
    Beiträge
    45

    Standard

    27th Jan
    KH dosed at 5.00 PM
    KH tested 8.00PM 8.4dKH

    28 Jan
    KH dosed at 5PM
    KH tested 8.00PM 8.7dKH

    29th Jan
    KH dosed at 5.00AM
    KH tested 8.00AM 9.7dKH

    I would like to know also why the variation

    If i am to allow KH Director to influence the dosing, don't the readings need to be more consistent ?

  2. #52
    Registriert seit
    28.01.2018
    Beiträge
    5

    Standard

    Mine is the same, All over the place from 3 to 12. I thought it had settled to 6.8 but its now on 5. Must have done about 12 tests now.

  3. #53
    Registriert seit
    10.10.2013
    Beiträge
    213

    Standard

    Zitat Zitat von paulfars Beitrag anzeigen
    27th Jan
    KH dosed at 5.00 PM
    KH tested 8.00PM 8.4dKH

    28 Jan
    KH dosed at 5PM
    KH tested 8.00PM 8.7dKH

    29th Jan
    KH dosed at 5.00AM
    KH tested 8.00AM 9.7dKH

    I would like to know also why the variation

    If i am to allow KH Director to influence the dosing, don't the readings need to be more consistent ?
    Maybe you add too many kh?
    You test after added KH not before, test also before for help to understand.

    Gael

  4. #54
    Registriert seit
    07.07.2013
    Beiträge
    45

    Standard

    will try a test just before the dose is due

  5. #55
    Registriert seit
    18.12.2017
    Beiträge
    19

    Standard

    I am getting the error: titration taking too long. any help appreciated

  6. #56
    Registriert seit
    07.07.2013
    Beiträge
    45

    Standard

    Zitat Zitat von Going Deep Beitrag anzeigen
    I am getting the error: titration taking too long. any help appreciated
    Have you just setup KHD or was it working ok before the error?

  7. #57
    Registriert seit
    18.12.2017
    Beiträge
    19

    Standard

    I have just set it up.

  8. #58
    Registriert seit
    07.07.2013
    Beiträge
    45

    Standard

    Zitat Zitat von Going Deep Beitrag anzeigen
    I have just set it up.
    I would double check your setup matches the instructions.

    Have you set the dosers to the correct speed and calibrated them. Is the number of the doser configured correctly in KHD

    When you click on KHD to take a measurement , what exactly happens?

  9. #59
    Registriert seit
    18.12.2017
    Beiträge
    19

    Standard

    I was very meticulous and followed the instructions to the T. I tried another measurement and read 11.1 and my Hanna Alk checker read 8.1. Will today if the reading gets better. I am using 50ml sample volume. Should I go back to the 80ml default?

  10. #60
    Registriert seit
    07.07.2013
    Beiträge
    45

    Standard

    Zitat Zitat von Going Deep Beitrag anzeigen
    I was very meticulous and followed the instructions to the T. I tried another measurement and read 11.1 and my Hanna Alk checker read 8.1. Will today if the reading gets better. I am using 50ml sample volume. Should I go back to the 80ml default?
    Mine has always been set to default 80ml so I can't comment on how it would effect the readings. I had to do about 10 measurements before it settled down to give constant readings.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •