Seite 1 von 3 123 LetzteLetzte
Zeige Ergebnis 1 bis 10 von 26

Thema: GHL app outside network setup

  1. #1
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard GHL app outside network setup

    could some one put a screen shot up of how they setup there GHL app for outside the network

    i have port forwarding running from previous ghl app that worked fine but cant seem to get it

    what i want to know is how you enter the host/ip : previously i would put in my ip then :80 and it would work but cant seem to make that work now?

    you dont have to show you ip just how you attached the port number at the end as i might be missing something.

    thanks
    Geändert von muz_zz (16.01.2018 um 02:43 Uhr)

  2. #2
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard

    also mention that i have the app working inside my network

    and can also access the webserver from outside my network
    Geändert von muz_zz (16.01.2018 um 05:52 Uhr)

  3. #3
    Registriert seit
    09.11.2017
    Beiträge
    103

    Standard

    Port forwarding with another port than 10001 (P3, Doser) or port 80 (P4) is first supported with app version 0.14.0. From this version you can edit the port on my devices page on a separate input field.
    Please notice that this is still not working on iOS with P3 or Doser because of a bug. We will fix this as soon as possible within the coming version 0.14.4.
    Geändert von Thilo (16.01.2018 um 12:15 Uhr)
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard

    Ok Thilo thank you glad I am not going mad and can’t get to work
    Is 0.14.4 expected soon?

    So to confirm it dose not work for current version of app for P3?

    Ok I have just had update tonight and see port number now
    So should this work now ?

  5. #5
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard

    We’ll I can’t believe it all day I have been trying to work out and seen app update for my iphone x and now I can see port and it works from outside network on port 10001

    Setup port forwarding for port 10001 and straight away it works

    Thank you GHL ����
    Geändert von muz_zz (16.01.2018 um 12:22 Uhr)

  6. #6
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard

    Just to let you know the app is very slow to load on outside network for me
    I have very fast 4G mobile data

    Not complaining but just thought I would let you know

    I am very happy it’s now working

  7. #7
    Registriert seit
    09.11.2017
    Beiträge
    103

    Standard

    Zitat Zitat von muz_zz Beitrag anzeigen
    Ok Thilo thank you glad I am not going mad and can’t get to work
    Is 0.14.4 expected soon?

    So to confirm it dose not work for current version of app for P3?

    Ok I have just had update tonight and see port number now
    So should this work now ?
    It doesn't work with P3 or Doser (except port 10001) on iOS with the current App Version.
    Version 0.14.4 will be released as soon as possible, I think within this week.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  8. #8
    Registriert seit
    12.01.2013
    Ort
    Sydney
    Beiträge
    141

    Standard

    Thilo an update was released 0.14.2 I seen yesterday so I updated and now can see port number in app
    I create new port forwarding from router and app now works outside network

    Is there any difference from using port 10001 instead of port 80?

    Thank you

  9. #9
    Registriert seit
    09.11.2017
    Beiträge
    103

    Standard

    Zitat Zitat von muz_zz Beitrag anzeigen
    Is there any difference from using port 10001 instead of port 80?
    10001 is the default port for ProfiLux 3 and Doser 2/Maxi, but normally port forwarding should work with any port.
    I've found the issue why it's not working correctly on iOS and I try to release a new app version today.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  10. #10
    Registriert seit
    14.10.2009
    Ort
    Dubai
    Beiträge
    166

    Standard

    I hope this issue is resolved soon... also in pl3 you need to assign passwords to admin and guest users as dedicate external port so suggest this option becomes available in app as well to avoid conflict...

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •