Results 1 to 6 of 6

Thread: KH Director und Triton Methode

  1. #1
    Join Date
    20.10.2016
    Posts
    13

    Default KH Director und Triton Methode

    Hallo

    Hätte Interesse an einen KH Director , wie würde es mit der Triton Methode funktionieren ?
    Beim Doser 2(2.1) wäre bei Balling usw Kanal 4 für die KH Lösung vorgesehen, bei der Triton Methode wäre KH in allen 4Flachen verteilt , also 4 Kanäle 🤔
    würde es mit einen zusätzlichen Doser2Slave funktionieren ?

    Zur Zeit laufen meine Doser2 mit der iOS App , würde das auch mit dem KH Director noch funktionieren ?

    Vieleicht gibt es schon Erfahrungswerte

    lg

  2. #2
    Join Date
    07.04.2017
    Posts
    157

    Default

    Yes this is fully possible. Im running the Triton method with the KH Director, and its a perfect match. Im running Profilux 4 and letting the KH Director control my 4 doser heads for Triton to keep the KH at 8. This is handled automatically by KH Director.

  3. #3
    Join Date
    20.10.2016
    Posts
    13

    Default

    Hallo Alekslyse


    How does this work with the KH Director with the dosage distributed over 4 channels? is only channel 4 for KH intended for it
    For Triton, dose 4x x ml to keep KH 8
    Do you have instructions for this?

  4. #4
    Join Date
    07.04.2017
    Posts
    157

    Default

    Quote Originally Posted by Skymario View Post
    Hallo Alekslyse


    How does this work with the KH Director with the dosage distributed over 4 channels? is only channel 4 for KH intended for it
    For Triton, dose 4x x ml to keep KH 8
    Do you have instructions for this?
    You can control up to 5 dosing pumps based on the KH measurement. No special programming needed. In the KH Director page in GCC you can choose to react pumps in ML or percentage. For us with Triton the "Add-on Control mode" is perfect ,where you can setup what maximum and minimum dosage intervals should be. Take a look on the KH director manual and it explains how to setup everything.

  5. #5
    Join Date
    20.10.2016
    Posts
    13

    Default

    OK
    can one adjust it also with the ios app GHL or only with GCC?


    Thank you

  6. #6
    Join Date
    07.04.2017
    Posts
    157

    Default

    Quote Originally Posted by Skymario View Post
    OK
    can one adjust it also with the ios app GHL or only with GCC?


    Thank you
    I dont know about the ios app as im using android, but in the android app you can adjust it (and even run KH measurement manually) through the app. I assume you can do the same on the ios app.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •