Results 1 to 8 of 8

Thread: Mitras 2 lightbar not dimming.

  1. #1
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default Mitras 2 lightbar not dimming.

    My mitras always is at 100%. No commands work. Why?

    Skickat från min G8141 via Tapatalk

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    some more details about hardware and settings, please
    screenshots
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    I have the p4. Mitras lightbar 2 140cm antic. Connected to the mitras outlet on the p4.

    Skickat från min G8141 via Tapatalk

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    1. Go to the MITRAS LIGHTBAR settings page and check the box, Mitras Lightbar present.
    2. At the bottom of that page, select the link SYSTEM. You will then be brought to the SYSTEM settings page.
    3. In the Communication interfaces section, click 3-times on Standard and set the function to MITRAS LIGHTBAR.
    4. Save settings.

    Test each channel in Light Composer.

    Also check the Mitras Lightbar settings to make sure you have the correct Illumination channels assigned to each channel on the LB2.

  5. #5
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Thx it works 😄

    Skickat från min G8141 via Tapatalk

  6. #6
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Will this cause problem with the usb? If I need to connect if the wifi isint working

    Skickat från min G8141 via Tapatalk

  7. #7
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Glad to hear it!

    You'll still be able to connect via USB, it won't interfere.

  8. #8
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Good. Thx again

    Skickat från min G8141 via Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •