Results 1 to 5 of 5

Thread: New Doser 2.1 and GCC Problem Error Code 28

  1. #1
    Join Date
    27.12.2017
    Posts
    3

    Default New Doser 2.1 and GCC Problem Error Code 28

    Hi

    After struggling to connect my new Doser 2.1 to GCC i finally get it to work trough wireless but everytime I start GCC on my computer the error code 28 flashes after a minute and the program shuts down?

  2. #2
    Join Date
    27.12.2017
    Posts
    3

    Default

    Anybody that can assist?

  3. #3
    Join Date
    15.02.2016
    Location
    Fort Myers, FL - USA
    Posts
    48

    Default

    This is usually due to a weak WiFi signal, or interference on the channel your WiFi is currently running.

    What firmware version is the Doser currently on? Make sure to upgrade to latest version if not on latest.

    You could try to change the WiFi channel on your WiFi router/AccessPoint.
    Info on WiFi: https://www.metageek.com/training/re...ls-1-6-11.html
    marco

    RS Reefer 450; /////GHL P3 * 2x PB5.1 * PLM-PWC * -> * 2x Mitras LX 7206, Doser 2 SA Royal Exclusiv RD3 80w(10v) * Bubble King Double Cone 180 w/ RD3
    GHL Owners Facebook Group: GHL Owners / ProfiLux / Mitras / etc

  4. #4
    Join Date
    27.12.2017
    Posts
    3

    Default

    Hi and thanks for the help

    The dosers firmware are the latest version but I will try to change the wifi channel. I have a network/lan cable at home that i could route from the tank to my computer if wifi doesnt work, or is usb a better choice?

  5. #5
    Join Date
    15.02.2016
    Location
    Fort Myers, FL - USA
    Posts
    48

    Default

    LAN is always better than WiFi, less chance for interference. If that’s an option, I’d go that route
    marco

    RS Reefer 450; /////GHL P3 * 2x PB5.1 * PLM-PWC * -> * 2x Mitras LX 7206, Doser 2 SA Royal Exclusiv RD3 80w(10v) * Bubble King Double Cone 180 w/ RD3
    GHL Owners Facebook Group: GHL Owners / ProfiLux / Mitras / etc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •