Results 1 to 3 of 3

Thread: Using different PC to control profilux 4 using GDD

  1. #1
    Join Date
    18.12.2017
    Posts
    44

    Default Using different PC to control profilux 4 using GDD

    Hello,
    I will be using a different computer to access and control my pro 4 via GCC. Is there anything special I need to do before I hook the pro 4 to my new computer via the usb? Thanks in advance for your help.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    Other than just downloading GCC on the other computer and selecting the correct COM port, there is nothing else you need to do. Your computer should automatically install the necessary USB driver when you connect the USB cable for the first time.

    All your settings are stored in the P4. When you connect on the other computer, your current settings will still be shown.

  3. #3
    Join Date
    18.12.2017
    Posts
    44

    Default

    Quote Originally Posted by Vinny View Post
    Hi,

    Other than just downloading GCC on the other computer and selecting the correct COM port, there is nothing else you need to do. Your computer should automatically install the necessary USB driver when you connect the USB cable for the first time.

    All your settings are stored in the P4. When you connect on the other computer, your current settings will still be shown.

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •