Results 1 to 3 of 3

Thread: Doser 2.1 Master

  1. #1
    Join Date
    07.05.2017
    Posts
    2

    Default Doser 2.1 Master

    I purchased a Doser 2.1 master and need to know if I can connect it to the PAB and control it from my Profilux 4?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Yes, but first you need to connect to that master via USB and change the doser to SLAVE mode. Once that is done, you can add the doser just like any other PAB-device. If you need a refresher, we have a how-to video for doing this:
    https://m.youtube.com/watch?list=PLI...&v=dT9_JfY3qH8

    If this will be the second doser in the system, don't forget to set the pump numbering.
    Last edited by Vinny; 24.11.2017 at 20:09.

  3. #3
    Join Date
    07.05.2017
    Posts
    2

    Default

    Quote Originally Posted by Vinny View Post
    Yes, but first you need to connect to that master via USB and change the doser to SLAVE mode. Once that is done, you can add the doser just like any other PAB-device. If you need a refresher, we have a how-to video for doing this:
    https://m.youtube.com/watch?list=PLI...&v=dT9_JfY3qH8

    If this will be the second doser in the system, don't forget to set the pump numbering.
    This is the first doser and I tried to talk to it with my windows 7 computer over USB but was not successful. I have a windows 10 laptop at work and will give that a try next week. Thanks for the info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •