Results 1 to 3 of 3

Thread: Email setup for Profilux4 Level-Sensors

  1. #1
    Join Date
    01.04.2017
    Posts
    58

    Default Email setup for Profilux4 Level-Sensors

    This is the mail i recive.
    What does
    Code:
    1
    and
    Code:
    +2
    mean ?

    Adding the description would be nice here too.

    Levelcontrol 1 : + 2
    Levelcontrol 2 : 1
    Levelcontrol 3 : + 2
    Levelcontrol 4

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The meaning of the numbers are explained on page 66 of our programming guide, see 6.4 Diagnostic. Please refer to that section.

  3. #3
    Join Date
    01.04.2017
    Posts
    58

    Default

    Seems like it reefers to Level controll cicuit instead of Level input ?
    Whats the does the pluss before the number mean ? "+ 2" vs "1"

    6.4 Diagnostic
    To facilitate the implementing of the level sensors, the menu item Diagnostic is available. The current state of all level sensor inputs is displayed here. On contact with water (= sensor active) the corresponding number of the sensor input is displayed.
    The display of "1 4 8" means that sensor inputs 1, 4 and 8 signal contact with water.
    Please note that a "contact with water" is also displayed when no sensor is connected. The diagnosis is terminated with Esc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •