Results 1 to 6 of 6

Thread: Doser 2.1 and slave doser2.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    19.04.2016
    Location
    Dubai
    Posts
    42

    Default Doser 2.1 and slave doser2.

    Hi

    Will a stand alone Doser 2.1 be able to connect and run a Slave Doser 2?
    My stand alone died and needs replacement.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Yes, this will work.

    Doser 2 and 2.1 SA/Slave versions are compatible with each other.

  3. #3
    Join Date
    05.09.2017
    Posts
    15

    Default

    I connected my slave doser to doser 2.1, but every time the pump #1 in main doser, the pump #1 of the slave delivers the dose too like the main doser.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    It'll do that if you have not yet configured the pump numbering on the Slave doser. Go to the SYSTEM settings page and click on the slave doser image, then click CONFIGURATION.

  5. #5
    Join Date
    05.09.2017
    Posts
    15

    Default

    I tried to configure the slave but I always had communication error, I did try to configure it with the old version GCC 109 with no success.

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •