Results 1 to 4 of 4

Thread: Firmware not suitable for this device error

  1. #1
    Join Date
    14.10.2016
    Posts
    31

    Default Firmware not suitable for this device error

    I have a profilux 4 which is currently running firmware v.706. When I try to update the firmware to either v7.07 or v7.08 I get the error - Firmware not suitable for this device. I have tried doing this with GCC v1.099 and v1.110 but get the same message each time. I have previously updated the firmware in the past with no issues. Any ideas ?
    Last edited by Tinpot; 24.08.2017 at 12:04.

  2. #2
    Join Date
    15.02.2016
    Location
    Fort Myers, FL - USA
    Posts
    48

    Default

    Make sure you're using the correct FIRMWARE update mode, and not the PAB Device update.

    Here is the HowTo video, just as a refresher

    https://www.youtube.com/watch?v=Fj0SH93QoKc
    marco

    RS Reefer 450; /////GHL P3 * 2x PB5.1 * PLM-PWC * -> * 2x Mitras LX 7206, Doser 2 SA Royal Exclusiv RD3 80w(10v) * Bubble King Double Cone 180 w/ RD3
    GHL Owners Facebook Group: GHL Owners / ProfiLux / Mitras / etc

  3. #3
    Join Date
    14.10.2016
    Posts
    31

    Default

    Quote Originally Posted by ReefClownMIA View Post
    Make sure you're using the correct FIRMWARE update mode, and not the PAB Device update.

    Here is the HowTo video, just as a refresher

    https://www.youtube.com/watch?v=Fj0SH93QoKc
    Yeah, that was it. I feel so stupid now ! :-)

  4. #4
    Join Date
    15.02.2016
    Location
    Fort Myers, FL - USA
    Posts
    48

    Default

    Quote Originally Posted by Tinpot View Post
    Yeah, that was it. I feel so stupid now ! :-)
    No worries at all - happens to the best of us.
    marco

    RS Reefer 450; /////GHL P3 * 2x PB5.1 * PLM-PWC * -> * 2x Mitras LX 7206, Doser 2 SA Royal Exclusiv RD3 80w(10v) * Bubble King Double Cone 180 w/ RD3
    GHL Owners Facebook Group: GHL Owners / ProfiLux / Mitras / etc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •