Results 1 to 3 of 3

Thread: GHL Doser 2 Post firmware update red/yellow flashing

  1. #1
    Join Date
    26.07.2017
    Posts
    2

    Default GHL Doser 2 Post firmware update red/yellow flashing

    Hi,

    I had a problem with my GHL Doser 2 last night noting that the pumps were not working. I also noted on the website that there was a number of updates to the GHL Control Centre and the firmware. I updated the Control Centre to 1.98 and I updated the Doser 2 firmware from 1.11 to the current 1.24. I also updated the driver for the USBVCOM to the latest in the Control Centre package.

    Post firmware update I can see the correct Doser 2 serial number and the firmware versions, however the GHL logo is flashing red/yellow and the pumps still dont work when I select the manual buttons on the front of the device, nor from the manual selection on the Control Centre.



    Any help would be appreciated.

    Regards

    Kingsley

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello Kingsley,

    Please email us for further support:
    support@ghl-kl.de (Outside North America)
    support@ghlusa.com (Within North America)

  3. #3
    Join Date
    26.07.2017
    Posts
    2

    Default

    Thanks Vinny. Regards Kingsley

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •