Can't see my Cond, Redox and pH2 probes in GCC

[moli9102]

Hi

I just realized tonight that I lost measurements from my Cond, Redox and pH2 probes in GGC, I have a profilux 3 with expansion card. It seem that it stopped last weekend. Any idea what it can be and how I can get the measurement back into GCC. That only thing I can remember happend last weekend, was that the fuse to the aquarium blew, due to two hairdryers running at the same time.
Could that have made some transient which can have damaged the expansion slots. I only have Temp and pH1 left.

/Morten

[Vinny]

Hi Morten,

Please inspect the expansion card pins and slot to see if there is anything out of the ordinary. Please also post a photo of the expansion card pins.

[moli9102]

So I opened the P3 in order to take the pictures Vinny has asked for. All the PCB looked fine, so I re-assembled the P3 again, and now it works, although all the calibration values are off. I can live with that.

[Vinny]

That's good to hear. A quick re-calibration should put the measurement values back in working order.