Results 1 to 4 of 4

Thread: Do action when ph/temp/sg is on a level

  1. #1
    Join Date
    07.04.2017
    Posts
    157

    Default Do action when ph/temp/sg is on a level

    How can I do an action based on a probe level. Say I want to run a scrubber if ph is under 8.2? (But not raise an alarm)

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Select the socket where you have the scrubber connected and set the function to pH Increase.

  3. #3
    Join Date
    07.04.2017
    Posts
    157

    Default

    Quote Originally Posted by Vinny View Post
    Select the socket where you have the scrubber connected and set the function to pH Increase.
    Its no possibility to add a number instead of only the increase and decrease function?

    I would love to see increase / decrease and a custom number in the programming logic / socket switch so the programming could be more flexible.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    You already have the option to set the desired number. It is in the pH probe settings page. Look at nominal value.

    You can also use a virtual probe. This is explained in the manual.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •