Results 1 to 8 of 8

Thread: Profilux 4 Feed pause on GCC

  1. #1
    Join Date
    08.04.2017
    Location
    AMIENS
    Posts
    31

    Default Profilux 4 Feed pause on GCC

    Hello,
    I am looking for how to manually do a feed pause in gcc
    I already have automatic feed pause configured in gcc but I can not find to make a manual pause

  2. #2
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    My ghl?

    Skickat från min E6553 via Tapatalk

  3. #3
    Join Date
    08.04.2017
    Location
    AMIENS
    Posts
    31

    Default

    Hello ,
    thanks for your reply
    Yes I have see the "MyGHL" option in dashboard but for security reasons, and I am afraid of improper handling with dosing pumps in MyGHL, it is configured read only access.
    That's why I'm looking for an option in GCC, waiting for a possible Android application that can do it.
    As I said in another post the controller is in an other room so it is simpler to perform the operation with the computer next to the aquarium rather than the by controller itself

  4. #4
    Join Date
    23.10.2016
    Posts
    55

    Default

    Hi,
    I have the same issue but solved it with a PLM-Adin module and a two-wires switch connected to one of the inputs.
    The switch is mounted on the aquarium cabinet. A button press is used for the feeding pause.

  5. #5
    Join Date
    23.11.2014
    Posts
    44

    Default

    Pressing the "Cancel Button" on the ProfiLux itself should be enough to initiate Feed Pause, no?
    Elos Diamond Midi 36
    Mitras 7206
    ProfiLux 4

  6. #6
    Join Date
    08.04.2017
    Location
    AMIENS
    Posts
    31

    Default

    thank you for the answers
    Pressing the "Cancel Button" on the ProfiLux itself should be enough to initiate Feed Pause, no?
    yes but the profilux is two rooms away from the aquarium
    behind the wall ;-)

    Hi,
    I have the same issue but solved it with a PLM-Adin module and a two-wires switch connected to one of the inputs.
    The switch is mounted on the aquarium cabinet. A button press is used for the feeding pause.
    Thank you, yes it is a solution but a little expensive for me for utility

    A function in GCC as for "maintenance" would be fine
    --
    Best Regards, Stéphane DAILLY.
    Administrator www.aqua-passion.com.

  7. #7
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    When the serverpart is up it won't be a problem. Then you can do it on any device. Worked nice on my p3

    Skickat från min E6553 via Tapatalk

  8. #8
    Join Date
    08.04.2017
    Location
    AMIENS
    Posts
    31

    Default

    Quote Originally Posted by faltaren View Post
    When the serverpart is up it won't be a problem. Then you can do it on any device. Worked nice on my p3

    Skickat från min E6553 via Tapatalk
    yes ,
    Thank you
    I have to wait for the server of the p4 to work, for the moment it does not exist
    --
    Best Regards, Stéphane DAILLY.
    Administrator www.aqua-passion.com.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •