Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Cant update expansion box 2 from 2.02 to 2.03

  1. #1
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default Cant update expansion box 2 from 2.02 to 2.03

    I´ve tried to update but cant get it to work. I have the P4 with 7.06 (wich i had to update with the emegencytool). I´ve removed all other pab. Reset the pab-system and readd the box. But the update always fail. I´ve tried the emegency way but it always fail. What to do? When i update it says that the memory is eresed but the box still works and has 2.02

  2. #2
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    The Firmware of the PL4 isn´t able to perform the firmware update for the expansion box yet (as I know).
    You have to use a PL3 (if you still have) or to wait until the update is possible with the PL4

  3. #3
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Hmm ok when will this come? Would be nice if there were info about that.

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    roughly in about 6 weeks according to our schedule
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #5
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    meanwhile use your P3 for that
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Sold my p3 😉. I'l wait. It works for now.

    Skickat från min E6553 via Tapatalk

  7. #7
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    This still dosent work. Eta?

    Skickat från min G8141 via Tapatalk

  8. #8
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    Anyone?

    Skickat från min G8141 via Tapatalk

  9. #9
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    PAB update support will be available in an upcoming GCC release.

  10. #10
    Join Date
    30.03.2011
    Location
    helsingborg
    Posts
    177

    Default

    In the next or in the future?

    Skickat från min G8141 via Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •