Results 1 to 3 of 3

Thread: All purpose Timet

  1. #1
    Join Date
    24.02.2017
    Location
    Freeport
    Posts
    51

    Default All purpose Timet

    Hello, at the feeding pause I have the system set to switch an outlet which powers a feeder to dispense food,all works well but I've noticed that my return pump (RD3) does not immediately go to minimum when the FP is triggered, this results in a large quantity of food going down the overflow.Is there a way to delay switching of the outlet (feeder) for s specified time to allow the pump to slow down?

  2. #2
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Is there a way to delay switching of the outlet (feeder) for s specified time to allow the pump to slow down?
    Yes. You can use the programmable logic for that.

    • Go to the menu "Programmable Logic"
    • Chose an unused logic
    • Set it to function "Delayed on"
    • Set Input 1 to "Filter"
    • Set the delay time as you need it
    • Save the logic by clicking "OK"
    • Go to the sockets menu
    • Change the feeder outlet from "Filter" to "Logic x"(the one you have set before)



    And that´s it.

  3. #3
    Join Date
    24.02.2017
    Location
    Freeport
    Posts
    51

    Default

    Thanks a lot!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •