Results 1 to 4 of 4

Thread: What's needed to connect DIY led?

  1. #1
    Join Date
    17.07.2012
    Location
    Houston
    Posts
    158

    Default What's needed to connect DIY led?

    I'm looking at adding a DIY led strip to my setup using a dimmable solderless kit from RapidLED.
    What would I need to hook this up to my Profilux so I can control them?

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    If you use a Kit like this, then you need a LFB-AP

  3. #3
    Join Date
    17.07.2012
    Location
    Houston
    Posts
    158

    Default

    Thank you!
    There seems to be very little information out there on this part and I don't see it on the GHL website.
    I assume the wires from the LED drivers connect to this, and then this connects to the Profilux via a Cat5 cable? Which port?
    -dennis

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    with a RJ12 Cable to 1-10V Port (L-Port)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •