I have 2 and have swapped cables and they both read wrong. One more than the other. But example for both with pump off its still reading over a 1000l/h of flow. I'll try looking inside the sensor...
Type: Posts; User: chiefzod
I have 2 and have swapped cables and they both read wrong. One more than the other. But example for both with pump off its still reading over a 1000l/h of flow. I'll try looking inside the sensor...
I've got a couple of 5000l flow sensors that have started to read off now and even with no flow never show as 0. Is there a way to clean the sensor or just replace that sensor part? I've tried a...
Hi
The KH director is second hand but detects fine and I can calibrate. The doser is slave 2.0 and works fine. Both are running of a Profilux 4 to control them. When ever I either try to do a...
Do we know if this is also the case for the ion director?
Thanks.
Hi
Just wondering if KH Director will work with an older ghl doser 2.0 slave? It will both be going into a profilx 4
Thanks.
Hi,
Is it possible to increase the maximum number of doses per day? The current max 150 but if doing 0.1ml I would like to have a lot more to slow drip some additives.
Can't raise a support ticket. I've tried 3 browsers and all pages give a redirect error when I try.
The wifi unit won't broadcast, not even as a hotspot and can see it's also not trying to...
Anyone got any ideas?
Hi,
I have a P4 that has worked fine for years. The firmware is the latest version on the p4 and I think wifi was also or a few version s behind. Everything has been fine until this week now the...
So has anyone got a way to do this on a P3. I know the reef status software use to be able to but can't seem to find that anymore.
Hi Vinny,
I updated and no change. Though it looks like the firmware is only for the P4. I'm running a 3.1n with what it says is latest firmware (6.29) so i guess it's not a feature for them.
...
Hi Vinny,
Ok i'll give that a try. I'm still on 1.0.9.7 so will upgrade.
I really want something that tells me time of day and how long also though.
Thnaks
Hi,
It's been a few years since I've had a profilux running but I'm setting up again at the moment. Is there any way to track the state of a socket. On and off and how long etc?
I know I use to...
Ho do you calibrate? Mine just sits on the diagnosis screen with number that jump all over the place.
I'd like to bump this also.
I use to run Vortech's on my tank and the control we have them is so much better through the profilux than the Tunze. Being able to set different patterns etc but the...
Same issue here. Can try via wireless network setting or by over the internet and it just won't connect. Works fine in safari browser though.
Mine have done it from the start but with Firmware 1.07 it became more noticeable.
Hi Hem,
You can save the colour already. It the box on the left side when your in composer that come up. You just create the new one and that colour will come up on the side. Then when you go...
Just wondering what is the maximum you can set the temperature to on the units? It get hot over here in Australia so I'm wondering if you can change it from 60 to 65 or higher?
Any updates it's been a couple of days now.
Found a problem with programming. If my lights are currently set to have 10 dimm points and i create or add 2 or any number more on in light composer and send to the light it still only stays at 10...
Yes i have setup up slaves etc and for normal use the slaves follow the master. But when you are in light composer doing stuff and tick output to lamps directly it only does the one connected via...
Also when you output to lamps on the Light composer it only does the one that is plugged in by the USB. it would be nice if it did all the slaves also so that you could get a true idea of the colour...
Yes certainly did, then a message comes up in German and i clicked yes and all the channels pop up with the correct runs and i clicked save. Did this a few times and the lights were doing nothing...