Thanks for the clarification
Type: Posts; User: MAXreefer
Thanks for the clarification
Still fairly new to the Profilux so please bare with me.
I have 2 x Tunze 6105. I got the Tunze Cables 1 & 2. I know where to plug them in.
I see you can use also both pumps on 1 channel with the...
Thank you
I ordered the silicone tubing from GHL as seen in the pic.
It seems the tubing slides very easy of the Doser adapters.
Is this the correct size tubing?
Thanks for any help
12831
Thanks
Am I correct the only difference between the 4 and 4e are the additional probes like Conductivity electrode and the Redox-Sensor?
All other functions from both units are the same?
Thanks for any...
Thanks for your quick reply....
Maybe you can resolve my 2 other questions also?
If they have both the web interface what is the difference then between P3 and P3ex?
Is it true I have to...
I have currently a PIIex and looking to upgrade to a PIII.
If I understood well you have to sent in the PII and you can't just order the PIII upgrade kit and install it yourself?
This seems kinda...
Thanks for the quick reply.
My mistake. I didn't mean PAB but the digital power bar.
Do I have to configure this one in conjunction with the dosing unit from scratch?
Thanks again
Michael
I have the Profilux II with firmware 4.8x and looking into updating to 5.x.
I know I will loose all my settings and made screenshots from the recent configurations to remember what I have to set.
...
Sometimes things can be so easy in life...
Thanks Matthias.
It is correct when I enable "ATO with 2 sensors" for Level 1 automatically Level 2 gets disabled in the software settings?
I my previous setup I used a float switch and optical level sensor (for safety) for my ATO and it worked great.
I got a new setup and guess wanted to be a little cheap and got 2 float switches and...
Don't know if you have the same problem as I had but I had the Alarm function activated also when I was "testing" the level sensors by holding them down with my hand etc.
I had to go on the...
Matthias,
I see in the download section Firmware 4.06 still says BETA.
As you are going to release 4.07 soon could we consider 4.06 as a release instead of Beta?
As I didn't setup the wavebox I can't tell you 100% for sure what to do and maybe Matthias can jump on this but from the logic I think you will have to do the following:
If you are going to do the...
You need the Tunze cables AND the splitter cables. I used all Tunze2 cables. I think to remember Matthias told me this is OK in another thread.
I only run the streams on the Profilux and the...
My pleasure.
The top of the streams sits about 5 inches below the rim of the tank and yes I am using the full size wavebox.
I have the streams in 2 groups.
Settings Group1:
Mode: Sequence1...
Hey Larry,
I have a 180G (72x24x24) with 2 overflows.
I run a Tunze Wavebox, 2 x 6101 and 2 x 6055 and get some great flow.
There are several options with the Profilux regarding flow patterns. I...
Blues:
8AM - 9AM: 1 to 50%
9AM - 10AM: 50 to 100%
10AM - 7PM: 100%
7PM - 8.30PM: 100 to 10%
8.30PM - 9PM: 10 to 1%
9PM - 8AM: 1%
Whites:
9AM - 12PM: 0 to 100%
You will love the Profilux and the software to control the AI modules.
You can do so much more as with the regular controller which comes with the AI.
Now you really can play around with the...
I have the also the AI units and running software version 4.0.61
In the settings for the "special lamp" it says:
White LED's are controlled by illumination channel....
Blue LED's are controlled by...
ok. Just wanted to be sure
Vielen Dank
Michael
Hey Matthias,
thanks for your quick reply.
Just to be sure:
When I do it on the Controller itself and go to temp -> callibration and confirm the controller immediately asks for " save settings"...
Just to confirm it happened to me also but only 1 out of the 3 pumps started running continuously.
This didn't happen when I upgraded fro 4.04 to 4.05 but only from 4.05 to 4.06
Michael
I have the Profilux II EX with firmware 4.05
I have done the upgrade to Beta version 4.06 but decided to go back to 4.05 until 4.06 was fully released.
Since I switched back to 4.05 it seems my...