Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Antworten
    6
    Hits
    170

    That's great!

    That's great!
  2. Antworten
    6
    Hits
    170

    Uninstall this driver, Restart the PC, install...

    Uninstall this driver, Restart the PC, install the driver, connect the USB cable to the fixture / PC, then try to connect again.

    Steps for manual USB driver install can be seen here:...
  3. Make sure the dial on the Tunze controller is...

    Make sure the dial on the Tunze controller is also set to full power.
  4. Antworten
    2
    Hits
    127

    Hi Zane, Yes, you can assign more than just...

    Hi Zane,

    Yes, you can assign more than just the alkalinity pump to react to the readings by the KHD. Have a look at our manual, the control option is explained there.
  5. Antworten
    1
    Hits
    108

    Hello Steven, It sounds like you need to set...

    Hello Steven,

    It sounds like you need to set the USB connection setting to COM (AUTO):

    1. Open GCC and click ADMINISTRATE at the top left part of the screen.
    2. Select the Doser 2 USB...
  6. Nope. When asked to firmly press the keys, you...

    Nope. When asked to firmly press the keys, you can press them in any order.
  7. Perfect!

    Perfect!
  8. If all else is working, the touch keys may just...

    If all else is working, the touch keys may just need to be calibrated.

    Please follow the steps in this video and let us know if that solves the problem.

    https://youtu.be/oW7RQjnMvY8
  9. Hello, You say it updated to 7.10 and you...

    Hello,

    You say it updated to 7.10 and you could connect with the app and PC. Only the touch keys were not functional?

    Did you try to do the update with GCC again?
    What was the previous FW you...
  10. Antworten
    3
    Hits
    163

    LBF-AP is the former name, now called 1-10V...

    LBF-AP is the former name, now called 1-10V breakout box. :)
  11. Antworten
    3
    Hits
    163

    That depends on the light fixture you have. ...

    That depends on the light fixture you have.

    1-10v controllable fixtures can be controlled with the 1-10v breakout box
  12. Thema: Level sensor

    von Vinny
    Antworten
    1
    Hits
    132

    Yes. You should use the assembly rod and...

    Yes.

    You should use the assembly rod and sensor bracket to hold the optical sensor.
  13. Antworten
    4
    Hits
    107

    This feature is currently only available for the...

    This feature is currently only available for the LX7.
  14. Antworten
    7
    Hits
    172

    Try to access the P4 web server with Google...

    Try to access the P4 web server with Google Chrome browser.
  15. Antworten
    7
    Hits
    105

    Glad to hear it! You'll still be able to...

    Glad to hear it!

    You'll still be able to connect via USB, it won't interfere.
  16. Antworten
    7
    Hits
    105

    1. Go to the MITRAS LIGHTBAR settings page and...

    1. Go to the MITRAS LIGHTBAR settings page and check the box, Mitras Lightbar present.
    2. At the bottom of that page, select the link SYSTEM. You will then be brought to the SYSTEM settings page....
  17. Antworten
    7
    Hits
    172

    GCC v1105 is only needed if you had a Maxi doser...

    GCC v1105 is only needed if you had a Maxi doser which is not the case here.

    You can do the update using GCC v1103. Take a look at our how-to video for performing the P4 firmware update:...
  18. Antworten
    7
    Hits
    172

    Restart your router and P4, then try to connect...

    Restart your router and P4, then try to connect after a few minutes.

    When updating the P4 firmware, please make sure to use the newer version of GCC. When asked to select the firmware version, be...
  19. Antworten
    7
    Hits
    172

    Hi Kenneth, Please connect via USB and go to...

    Hi Kenneth,

    Please connect via USB and go to the COMMUNICATIONS settings page. Set the IP address of the P4 to another number.

    For example, if your P4 currently has an IP address of...
  20. Antworten
    2
    Hits
    109

    1. It would be best to contact us directly. 2....

    1. It would be best to contact us directly.

    2. As long as you already have a D2.1 SA or P4, that is all you'll need.
  21. Antworten
    8
    Hits
    187

    It is a false positive. Please disable the...

    It is a false positive. Please disable the protection and download again.
  22. Antworten
    2
    Hits
    99

    Is this probe set to record measurements?

    Is this probe set to record measurements?
  23. Antworten
    6
    Hits
    170

    Hi there, I would first start by connecting...

    Hi there,

    I would first start by connecting the USB cable to both your computer and the Mitras LX6. Once that is done, open windows device manager and look for GHL VIRTUAL COMMUNICATIONS PORT...
  24. If you don't have a Maxi the 7.09 update is not...

    If you don't have a Maxi the 7.09 update is not needed.

    Once the 7.10 version is released, you can just update to that version in one shot. That way, you'll have both support for the Maxi and KHD.
  25. Hi, Other than just downloading GCC on the...

    Hi,

    Other than just downloading GCC on the other computer and selecting the correct COM port, there is nothing else you need to do. Your computer should automatically install the necessary USB...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4