Profilux 3 - Upgraded the firmware 6.18 to 6.29 today and the CondS card PL-0003 is no longer listed in Sensors
Factory reset as well as re-seat of the card did not fix the issue.
Any ideas appreciated
Carsten
Profilux 3 - Upgraded the firmware 6.18 to 6.29 today and the CondS card PL-0003 is no longer listed in Sensors
Factory reset as well as re-seat of the card did not fix the issue.
Any ideas appreciated
Carsten
Hallo Carsten
Please test it with a other Port
regards Pit
Support for this card was not removed. Please do what PIWAWT suggested.
That actually did the trick :cool: - Many thanks for the suggestion :) :D
System report before
***** System report *****
Controller properties
Name: ProfiLux 3
Firmwareversion: 6.29
Device address: 1
PAB address: 17
Serialnumber: 1005051029
Slot count: 3
Level inputs: 2
Sensor 1: pH-value
Sensor 2: Temperature
Onboard 1-10V outputs: 4
Onboard socket outputs: 8
Slot/card properties
Slot number 0
Name: SERIAL
Class: Communication card
Slot number 1
none
Slot number 2
none
PAB devices
Moving the card slot 1 -> slot 2
***** System report *****
Controller properties
Name: ProfiLux 3
Firmwareversion: 6.29
Device address: 1
PAB address: 17
Serialnumber: 1005051029
Slot count: 3
Level inputs: 2
Sensor 1: pH-value
Sensor 2: Temperature
Onboard 1-10V outputs: 4
Onboard socket outputs: 8
Slot/card properties
Slot number 0
Name: SERIAL
Class: Communication card
Slot number 1
none
Slot number 2
Name: COND S
Class: Analog card
Sensor 1: Conduct.(S)
PAB devices