RJ45 Socket on PowerBar 6D PAB

Can I get the part number for the RJ45 sockets used on the powerbar 6D

I have some where the copper pins in them have corroded away and I would like to replace them.
I am comfortable using hot air and replacing surface mount parts, but I would like to order replacement parts before I pull my working units out of use.

In total I have 8 powerbars, most have issues around the connector (either with the connector being loose or corrosion of the pins).

All of the units are out of warranty, so I just need the brand/part number for the parts

thanks

Darren

As long as you have one remaining PAB port left you could daisy chain devices with a RG45 Y-Splitter. CAN can handle that.

But replacing the actual ports is of course much nicer if you can pull it off.

GHL, can you provide the part number I am looking for.
I don't need you to supply it (unless you are happy to supply just the socket/connector), I just need the vendor/part number for the connector.

Thanks

Please contact service@ghl-kl.de for replacements