Doser 2.1 Master

I purchased a Doser 2.1 master and need to know if I can connect it to the PAB and control it from my Profilux 4?

Yes, but first you need to connect to that master via USB and change the doser to SLAVE mode. Once that is done, you can add the doser just like any other PAB-device. If you need a refresher, we have a how-to video for doing this:
https://m.youtube.com/watch?list=PLI...&v=dT9_JfY3qH8

If this will be the second doser in the system, don't forget to set the pump numbering. :)

Quote:

---

Originally Posted by Vinny

Yes, but first you need to connect to that master via USB and change the doser to SLAVE mode. Once that is done, you can add the doser just like any other PAB-device. If you need a refresher, we have a how-to video for doing this:
https://m.youtube.com/watch?list=PLI...&v=dT9_JfY3qH8

If this will be the second doser in the system, don't forget to set the pump numbering. :)

---

This is the first doser and I tried to talk to it with my windows 7 computer over USB but was not successful. I have a windows 10 laptop at work and will give that a try next week. Thanks for the info.