Printable View
General question
Is there a way for the plastic head to which the intake and outtake lines attach can me switch from one side to another? Originally pump is pointing down. Would like to know if it can be moved from pointing down to pointing to the left or to the right? Like the old Maxi doser you were able to move the pump head from one position to another in order to make it more accessible for the intake and outtake tubes?
Thank You in advance.
Sent from my iPhone using Tapatalk
Hello,
Yes, of course it's possible:
Attachment 13508
Gaël
Awesome.
Can you point out instructions on how to do this???
Sent from my iPhone using Tapatalk
1. Remove the 4 screws underneath the doser (use a T10 Torx screwdriver) and carefully lift the top cover; watch out for the wires which are connected to the LED indicator and mainboard
2. Carefully disconnect the wires connected to the mainboard from the pump motors and ribbon cable
3. Lift the whole front face with the pump heads and remove the 4 screws which hold the pumps in-place; use the same T10 screwdriver
4. Rotate the heads, put the screws back on, connect the ribbon cable and re-install front face plate
5. Reconnect the remaining cables to the mainboard, put the cover back on with the screws.