now on our download page
included:
inbegriffen:
- P4 Firmware V7.10 incl. KHD Support and update of PAB devices
I am working right now on the next versions for KHD support of P3 an Doser SA, comes ASAP
Printable View
now on our download page
included:
inbegriffen:
- P4 Firmware V7.10 incl. KHD Support and update of PAB devices
I am working right now on the next versions for KHD support of P3 an Doser SA, comes ASAP
Something is wrong with the wifi update tool. Says file is missing and then the update stops. Wifi stoped working. Dowloaded an older version and finished the update but the wifi still dosent work . I have win 10 64x, antivirus off.
I tested it here, it worked,
Did you unzip the folder?
Yes. Ive done it before. I get an Windows error message. The wifi update from gcc 1.1.0.3 finishes but the wifi is dead. No light. All newer version wont work, same error. Tried 6512 to. Same problem
Skickat från min G8141 via Tapatalk
Matthias F must support this, I am lost here.
He is back in the office coming Monday.
But a WiFi firmware update with the tool must work always, you can't brick the module.
Maybe try a powercycle and peroform the update again.
I tried that, waited over a minute. Still dead. I can try it again. Im sure its a windows problem but all versions after 1.1.0.3 wont work.
GCC and WiFi update tool are two independent softwares
yes but someting must have changed. The one boundled with 1.1.0.3 finish the update. The otherones fail.
Did the update again. Same result. This is the wifi version with 1.1.0.3 to be clear. Other versions dont even start the update.
Skickat från min G8141 via Tapatalk
Here is the log:
************** Undantagstext **************
System.ComponentModel.Win32Exception (0x80004005): Det går inte att hitta filen
vid System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
vid System.Diagnostics.Process.Start()
vid System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
vid A.C.a()
vid A.B.A(Object , EventArgs )
vid System.Windows.Forms.Control.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
vid System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
vid System.Windows.Forms.Control.WndProc(Message& m)
vid System.Windows.Forms.ButtonBase.WndProc(Message& m)
vid System.Windows.Forms.Button.WndProc(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
vid System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Inlästa sammansättningar **************
mscorlib
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2600.0 built by: NET471REL1LAST
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
WiFi_FirmwareUpdateTool
Sammansättningsversion: 1.0.0.0
Win32-version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/GHLControlCenter_V1106/WiFi/WiFi-Firmware-Update-Tool/WiFi_FirmwareUpdateTool.exe
----------------------------------------
System.Windows.Forms
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2600.0 built by: NET471REL1LAST
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2612.0 built by: NET471REL1LAST_B
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Windows.Forms.resources
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_sv_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Sammansättningsversion: 4.0.0.0
Win32-version: 4.7.2556.0 built by: NET471REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_sv_b77a5c561934e089/mscorlib.resources.dll
----------------------------------------
************** JIT-felsökning **************
För att aktivera JIT-felsökning (just-in-time ) måste .config-filen för det här
tillämpningsprogrammet eller datorn (machine.config) ha
jitDebugging-värdet angivet i avsnittet system.windows.forms.
Tillämpningsprogrammet måste också vara kompilerat med felsökning
aktiverat.
Till exempel:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
Updated the firmware to 7.10. So that works. Also tried to update the wifi on a different computer (win10). Same problem.
Update: Installed Windows 7 and tried it again. Same error...
More problems... I updated to 7.10. Now the temp is off. I have a manuell tempprobe that always have been in sync with the profilux. Now after the update the profilux reads 2 C to high. The p4 is reset with factory settings then the settings is imported via file. This is both direct on the p4 and my exbox 2, so on two different tanks. What to do?
Update! I did a reset on the p4 and disconnected all pab and did a reset in the pab. Redid all settings (no backup). Then added pab one efter one. Allso now the exbox 2 is last in the chain. The p4 now show the correct temp. The exbox still is 1,3 C to high. I allso swapped the tempprobes. Same values so its the exbox 2. Tested before and after I updated the exbox with new firmware. Still the same.
Yes I have. But why is it wrong? The profilux should have the right readings...
Skickat från min G8141 via Tapatalk
Something is very wrong. When i upload the firmware and then reboots the profilux the wifi redy is checked. module version is 0. When i reupload the file system the filesystystem ok is checked and firmware is 6565. BUT. The wifi dosent start. I have all the settings. If i reboot the profilux its back to no filesystem and module 0.
we take this to 2nd level support
please email GHL
I've emaild the support now
Skickat från min G8141 via Tapatalk