Since updating the firmware, I am missing four buttons from the bottom left on the touch, also the thunderstorm button does not activate a thunderstorm.
Gazz
Printable View
Since updating the firmware, I am missing four buttons from the bottom left on the touch, also the thunderstorm button does not activate a thunderstorm.
Gazz
Have you tried running the Upload Pictures process?
in GCC, make sure that expert mode is enabled, under the view menu.
Then click on Profilux Touch on the left.
You should now see two buttons in the Profilux Touch pane on the right.
At this point click Upload pictures.
You will be prompted to select the files.
The files will be in the GHLControlCenter_VXXXX\ProfiLuxTouchFiles\PicsXXX directory. Note: The XXX and XXXX will be specific to the version of GCC you have installed and the firmware options for the Touch in the version of GCC. Pick the version that matches your system (most likely the latest).
Repeat the upload files process for both files (6_Icons57x57-2.png and 7_ControlsR.png). This takes a few minutes for each file.
Once both files have been uploaded, click Update pics.
This has nothing to do with the pictures.
The buttons he is talking about are the automatic water change buttons. The new Touch firmware show them only if AWC has been set up.
Thunderstorm: you have to start at least once a thunderstorm with GCC or web interface in order to define the duration, after that this duration will be used for the start command from the Touch.
Or use firmware 6.10 for Profilux, this has a default thunderstorm duration if nothing else has been set.