Printable View
hi
i had been using one unit of mitras simu stick 55 and connected it to L3,L4 socket.
i set this to illumination 4 with auto-switch on timer from 4pm to 12pm
recently i purchased an additional unit of mitras simu stick 55, and i plugged the 2nd unit to port 2 of the mitras driver.
however the auto-timer no longer works, and the lamp is always-on for 24 hours per day
pls help.
In order to help you, we need some more information:
-Have you connected the Mitras Driver actually only to L3L4 or to L1L2 and L3L4?
Because you usually need two L-Ports in order to control all four colours of the stick...
-Please post some screenshots of your Simu stick settings.
its connected to L3L4 and L5L6
as you can see below, i've assigned illuminaton 4 to all L3 to L6.
illumination 4 will begin in the afternoon and stop in the evening.
Attachment 6800
Attachment 6801
According to your settings, I can't see any reason why the lamp should now be on for 24hours only if you added a second simu stick.
So are both lamps permanently on or only one of them?
Are you still able to dim the lamps manually via the menu point light scenarios? You would have to shift the bar no. 4 since you have programmed illumination 4 for the sticks.
Or if you connect one plug of the driver to L1L2 and assign the function illumination 4 to L1 and L2 - is there any difference then?