PDA

View Full Version : PAB Cable 10 m question



NemOne
01.01.2012, 18:32
Hello,
I recently purchased PIIIex and I need to put my 6D powerbar away from the controller so I plan on purchasing the 10 meters PAB cable but prior to that I want to check if that long way connection between the power bar and P3ex is fine. I am concerned that 10m connection between the power bar and controller may get the signal weaker or more delay in reaction? Am I wrong? Thanks in advance.

Blahenazo
01.01.2012, 19:06
PAB is a can bus system ( or similar ) and its should work for very long distances ( 100 meter etc... )


I my self am using a 15 or 25 meter cable don't remember anymore (but its coiled up alot =)

for the rest
L-port, S-port 10m metres
sensors 8m

Wirus
01.01.2012, 20:27
If you have a powerbar 6D-PAB: No problem
If you have a powerbar 6D without PAB: That´s no PAB device, so a PAB cable wouldn´t help. You need a cable for a S-Port