PDA

View Full Version : Expansion cards



Kazak
21.06.2009, 14:16
The computer has ceased to define in slots 0 and 1 cards of expansion.
In what there can be a problem?

Matthias
22.06.2009, 06:31
sorry, I don't understand the question

can you try it again in other words and more detailled?

Kazak
22.06.2009, 07:21
I have 2 computers GHL ProfiLux Plus II v.4.05.
I have 3 expansion cards:
1.PLM-2L4S
2.PLM-USB
3.PLM-CondS-Redox
Has paid attention that PLM-2L4S and PLM-USB have ceased to work. I have deleted them, and have put in slot where desktop PLM-CondS-Redox unit.
They fine work and are defined GHL at loading. Means 1 slot and 2 does not work. 0 slot defines all units.
Too most happens on other computer GHL. Only 2 slot there does not work.
Wearing upgrade does not help.
Restoring of old wearing does not help.

Kazak
23.06.2009, 19:37
I am clear for you have expressed the thought?

Matthias
24.06.2009, 17:26
ok, slot 0 is working, the other 2 slots are not recognizing the cards

Maybe it has something to do with your serial number. If the serial number printed on the bottom of the device is different to the serialnumber which is stored in the memory then the ProfiLux will not work correctly.

Let us check if the serialnumber causes the trouble. What is the S/N on the label (see bottom of ProfiLux), and which S/N is displayed in ProfiLuxControl?

Kazak
24.06.2009, 17:41
Yes it is correct - do not coincide.

1. GHL S/N on the label 0707092045
S/N is displayed in ProfiLuxControl 707046045

2. GHL S/N on the label 0712092116
S/N is displayed in ProfiLuxControl 712092116

How to rectify an error?

Matthias
26.06.2009, 15:50
for the first ProfiLux:
these numbers show clearly that someone performed an "upgrade" to ProfiLux Plus II eX - do you have an eX upgrade kit built in? if not - the serial number must be repaired
If you want to do this then send me an email (please not a PM), I will give you detailled instructions

Kazak
26.06.2009, 19:39
On this address:
info@ghl-kl.de